On Mon, Jun 26, 2006 at 11:40:06PM +0200, Stefan Lucke wrote: > On Montag 26 Juni 2006 13:28, CR wrote: > > Hi, > > > > I'm using VDR 1.4.0-2, softdevice cvs 2006-5-30, nVidia 6200TC > > video card, nVidia binary driver 8762, Xorg 6.8.1, TV-out (NTSC) @ > > 800x600x24bpp, GCC 4.1.1 . > > Newer nvidia cards do not support Overlay mode: > http://lists.berlios.de/pipermail/softdevice-devel/2006q1/001770.html > > > For OSD, if I use "psuedo", in full-screen mode, the entire OSD > > "blinks" when there is video and the OSD is not usable. If I use > > "software" for OSD setting, then OSD looks OK but when overlayed > > over video, OSD colors are all wrong. > > Wrong OSD color only ? > Or both video and OSD ? here both were wrong ... > Use softdevice setup OSD and try to change the HUE value to max (100). yep, changing HUE to 0 or 100 works fine here hope this works for others too ... thanks, Herbert > If you can read german, have a look at this: > http://www.vdr-portal.de/board/thread.php?threadid=49914&hilight=nvidia+AND+softdevice > > > > > Has anyone else experienced anything like this? > > > > I've seen similar behavior on a TNT2 using the opensource "nv" driver, and > > other bizarre problems using ATI cards (both opensource and ATI > > proprietary drive), so I think something in softdevice OSD code is > > incorrect. > > Radeons (rv280:9200 and rv350:9550) work fine even with pseudo mode > using Xorg 7.0 here. The limitation in pseudo mode is, that it is not a real > alphablend mode. > > -- > Stefan Lucke > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
