Maybe I'm not doing it right, but I get around 2000fps while running vdr. 30 maj 2006 kl. 17.31 skrev Simon Baxter: > What kind of fps to you get with 'glxgears'? > > If you're only getting ~100fps, as I first was, the video will be bad. > Mine's now around 500fps and smooth, using vdr-xine. > > > Shuttle FX43G > AMD 2.2G > Fedora Core 5 > ----- Original Message ----- > From: "Martin" <Martin@xxxxxxxxxxxx> > To: "'VDR Mailing List'" <vdr@xxxxxxxxxxx> > Sent: Tuesday, May 30, 2006 8:28 AM > Subject: RE: TV-out, softdevice > > >> Have your tried nvidia-config? Could be that you Sync to Blank. >> >> Regards, >> Martin >> >> -----Original Message----- >> From: vdr-bounces@xxxxxxxxxxx [mailto:vdr-bounces@xxxxxxxxxxx] On >> Behalf >> Of >> Johan Linder >> Sent: Tuesday, May 30, 2006 9:19 AM >> To: vdr@xxxxxxxxxxx >> Subject: TV-out, softdevice >> >> Hi! >> I've been trying for a while now to get the TV-out working >> smoothly. It >> feels like the TV-out is "computerized", like it's only 20fps or >> something. I've been searching the net for answers but haven't >> found any >> helping tips. Is it possible to get a smooth TV-out, or should I >> accept >> some >> >> studdering? >> >> I start vdr with: vdr -l 3 -P "softdevice -vo xv:" -P "subtitles" -P >> "osdteletext" >> >> vdr-1.4.0, softdevice-0.2.3 >> >> // Johan >> >> >> # lspci >> 00:00.0 Memory controller: nVidia Corporation CK804 Memory >> Controller (rev >> a2) >> 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a2) >> 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) >> 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller >> (rev a2) >> 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller >> (rev a2) >> 00:04.0 Multimedia audio controller: nVidia Corporation CK804 >> AC'97 Audio >> Controller (rev a2) >> 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2) >> 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) >> 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a2) >> 00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2) >> 00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2) >> 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2) >> 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2) >> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/ >> Opteron] >> HyperTransport Technology Configuration >> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/ >> Opteron] >> Address Map >> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/ >> Opteron] >> DRAM >> >> Controller >> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/ >> Opteron] >> Miscellaneous Control >> 01:07.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI >> Video and >> Audio Decoder (rev 05) >> 01:07.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video >> and Audio >> Decoder [MPEG Port] (rev 05) >> 05:00.0 VGA compatible controller: nVidia Corporation NV43 >> [GeForce 6600] >> (rev a2) >> >> >> >> >> xorg.conf: >> Section "Monitor" >> Identifier "Monitor0" >> VendorName "Monitor Vendor" >> ModelName "Monitor Model" >> #HorizSync 30.0 - 70.0 >> HorizSync 30 - 50 >> #VertRefresh 50.0 - 120.0 >> VertRefresh 50 - 50 >> Modeline "720x576" 13.5 720 744 800 864 576 586 590 624 -hsync - >> vsync >> interlace >> EndSection >> >> Section "Device" >> Identifier "Card0" >> Driver "nvidia" >> VendorName "nVidia Corporation" >> BoardName "Unknown Board" >> Option "Connected Monitor" "TV" >> # Option "TwinView" "true" >> # Option "TwinViewOrientation" "Clone" >> Option "TVOutFormat" "SVIDEO" >> Option "TVStandard" "PAL-B" >> Option "TVOverScan" "0.6" >> Option "SecondMonitorHorizSync" "30-50" >> Option "SecondMonitorVertRefresh" "50" >> Option "MetaModes" >> "1024x768,1024x768;800x600,800x600;640x480,640x480;512x384,512x384" >> EndSection >> >> Section "Screen" >> Identifier "Screen0" >> Device "Card0" >> Monitor "Monitor0" >> DefaultDepth 24 >> Option "dpms" >> Option "XvMC" >> Option "RenderAccel" "on" >> Option "Overlay" "on" >> Option "NoFlip" "off" >> Option "UBB" "on" >> Option "XvmcUsesTextures" "on" >> Option "MultisampleCompability" "on" >> Option "OverlayDefaultVisual" "on" >> Option "HWCursor" "on" >> Option "AllowGLXWithComposite" "on" >> SubSection "Display" >> Viewport 0 0 >> Depth 24 >> # Modes "1024x768" >> Modes "720x576" >> EndSubSection >> EndSection >> >> >> _______________________________________________ >> vdr mailing list >> vdr@xxxxxxxxxxx >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr >> >> >> _______________________________________________ >> vdr mailing list >> vdr@xxxxxxxxxxx >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
