TV-out, softdevice

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



What kind of fps to you get with 'glxgears'?

If you're only getting ~100fps, as I first was, the video will be bad. 
Mine's now around 500fps and smooth, using vdr-xine.


Shuttle FX43G
AMD 2.2G
Fedora Core 5
----- Original Message ----- 
From: "Martin" <Martin@xxxxxxxxxxxx>
To: "'VDR Mailing List'" <vdr@xxxxxxxxxxx>
Sent: Tuesday, May 30, 2006 8:28 AM
Subject: RE: TV-out, softdevice


> Have your tried nvidia-config? Could be that you Sync to Blank.
>
> Regards,
> Martin
>
> -----Original Message-----
> From: vdr-bounces@xxxxxxxxxxx [mailto:vdr-bounces@xxxxxxxxxxx] On Behalf 
> Of
> Johan Linder
> Sent: Tuesday, May 30, 2006 9:19 AM
> To: vdr@xxxxxxxxxxx
> Subject: TV-out, softdevice
>
> Hi!
> I've been trying for a while now to get the TV-out working smoothly. It
> feels like the TV-out is "computerized", like it's only 20fps or
> something. I've been searching the net for answers but haven't found any
> helping tips. Is it possible to get a smooth TV-out, or should I accept 
> some
>
> studdering?
>
> I start vdr with: vdr -l 3 -P "softdevice -vo xv:" -P "subtitles" -P
> "osdteletext"
>
> vdr-1.4.0, softdevice-0.2.3
>
> // Johan
>
>
> # lspci
> 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev
> a2)
> 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a2)
> 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
> 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
> 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
> 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio
> Controller (rev a2)
> 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
> 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
> 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a2)
> 00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2)
> 00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2)
> 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2)
> 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2)
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> HyperTransport Technology Configuration
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Address Map
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
> DRAM
>
> Controller
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Miscellaneous Control
> 01:07.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and
> Audio Decoder (rev 05)
> 01:07.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio
> Decoder [MPEG Port] (rev 05)
> 05:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600]
> (rev a2)
>
>
>
>
> xorg.conf:
> Section "Monitor"
>    Identifier     "Monitor0"
>    VendorName     "Monitor Vendor"
>    ModelName      "Monitor Model"
>    #HorizSync       30.0 - 70.0
>    HorizSync       30 - 50
>    #VertRefresh     50.0 - 120.0
>    VertRefresh     50 - 50
>    Modeline "720x576" 13.5 720 744 800 864 576 586 590 624 -hsync -vsync
> interlace
> EndSection
>
> Section "Device"
>    Identifier     "Card0"
>    Driver         "nvidia"
>    VendorName     "nVidia Corporation"
>    BoardName      "Unknown Board"
>    Option        "Connected Monitor" "TV"
> #    Option        "TwinView" "true"
> #    Option        "TwinViewOrientation" "Clone"
>    Option         "TVOutFormat" "SVIDEO"
>    Option         "TVStandard" "PAL-B"
>    Option         "TVOverScan" "0.6"
>    Option         "SecondMonitorHorizSync" "30-50"
>    Option         "SecondMonitorVertRefresh" "50"
>    Option         "MetaModes"
> "1024x768,1024x768;800x600,800x600;640x480,640x480;512x384,512x384"
> EndSection
>
> Section "Screen"
>    Identifier     "Screen0"
>    Device         "Card0"
>    Monitor        "Monitor0"
>    DefaultDepth    24
>    Option         "dpms"
>    Option         "XvMC"
>    Option         "RenderAccel" "on"
>    Option         "Overlay" "on"
>    Option         "NoFlip" "off"
>    Option         "UBB" "on"
>    Option         "XvmcUsesTextures" "on"
>    Option         "MultisampleCompability" "on"
>    Option         "OverlayDefaultVisual" "on"
>    Option         "HWCursor" "on"
>    Option         "AllowGLXWithComposite" "on"
>    SubSection     "Display"
>        Viewport    0 0
>        Depth       24
> #        Modes      "1024x768"
>        Modes      "720x576"
>    EndSubSection
> EndSection
>
>
> _______________________________________________
> vdr mailing list
> vdr@xxxxxxxxxxx
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>
>
> _______________________________________________
> vdr mailing list
> vdr@xxxxxxxxxxx
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr 




[Index of Archives]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Big List of Linux Books]     [Fedora Users]     [Fedora Women]     [ALSA Devel]     [Linux USB]

  Powered by Linux