Burak BAYER schrieb: > Martin Wache wrote: > >> Burak BAYER schrieb: >> >> >> >>>> A bunch of us tried and tried to get the FX series of cards to work >>>> with softdevice and DFB with no luck, there was OSD display, but never >>>> video, nearly was the same problem for the GT series cards.. >>>> >>>> >> >> Are you using DFB together with the vesaFB? If you do that you don't >> have access to the hardware acceleration, and the softdevice only >> supports video over the hardware scaler. You need a special framebuffer >> driver for nvidia as well as a driver for you card in DFB to get the >> hardware acceleration. >> >> You can instead try to use X11/Xv, but also there we got some reports on >> buggy drivers. Or use the softdevice with plain 15/16bit framebuffer, >> but I can't recommend that (it's slow and I don't know anyone who uses >> it..). >> I'm sorry, but to my knowledge nvidia is due to the bad driver support >> not a good choice for use with the softdevice... >> >> Bye, >> Martin >> >> _______________________________________________ >> vdr mailing list >> vdr@xxxxxxxxxxx >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr >> >> >> > I cannot get fb work with official nvidia drivers.. Is there any way to > do this?? I am using nvidiafb from kernel.. > Sorry, I don't have a nvidia card and can't say much on this... Maybe you should ask on the DFB list. Or buy a Matrox card, they are well supported and quite cheap (10-20 Euro at ebay) Bye, Martin
