On Sun, 29 Jan 2006 19:46:57 -0600 Chad Flynt <hoochster@xxxxxxxxxx> wrote: > I guess I should also state I am using DirectFB, I am going to try and > go back to the version of CVS I was using on the older system and see if > that is the problem. > > Chad Flynt wrote: > > > I recently got xine up and running on an AMD 2600+ and all seemed to > > be working fine, I am wanting to do High Definition and it was coming > > close to maxing out the cpu and just wasn't perfect on the HDTV > > channels. So I decided to swap it out with one of my other systems. > > I changed it out for a 64 Bit 3500+. I didn't compile my kernel in 64 > > bit mode, but otherwise as far as I can tell, set everything back up > > the same as it was before. All works, but my CPU usage is much higher > > just on normal channels and on High Definition it really isn't that > > high but I get jerky picture quality on any High Def Channel and I > > didn't have that on the slower system. My cpu on the slower system > > would run bout 5-10% with Xine, and hit 80-90% on HDTV and that high > > the pic quality just wasn't the best it could be but it was smooth. > > On the faster pc, I average bout 17-20+% on regular channels, which > > seems very high compared to the other, and on HDTV I am only running > > bout 60% but I am sure that is cuz of the jerkyness and it just not > > being smooth. > > > > My question is, is there anything I missed maybe? I just ran default > > settings on the old system and tried on the new and running into this, > > I haven't tried messing with deinterlacers or anything like that, > > mainly cuz I don't know enough about them. The only thing I can think > > of is the chipsets. The old system ran a Nivida 2 chipset and the new > > system runs a Via K8t800Pro VT8237 chipset. Is there something I > > should do differntly? Any suggestion are gladly welcomed. > > Also trying to get the onboard SPDIF to work, haven't tried installing > > Mplayer yet to test it, but can't for the life of me make it work via > > Xine, even with the Pass Through set etc, hopefully missing something > > on that too. > > Were you using the same graphics card on the older system too? -- Niko Mikkil?
