Klaus Schmidinger wrote: > Please put a line like > > fprintf(stderr, "%04X\n", Key); > > at the beginning of cDisplayChannel::ProcessKey() and check > whether, when you press the Up key, hold it down for a while > and finally release it, you get > > 0000 > 8000 > 8000 > 8000 > 8000 > 8000 > 8000 > 8000 > 8000 > 8000 > 8000 > 8000 > 8000 > 4000 > > The important thing is that there is not a single 0000 between > all the 8000. If you do get an interruption there, then you > should trace that back to where it comes from. Ok, here is the log from holding down the 'up' key. /dev/input/event2: press 0000000100010021 <-- debug output remote plugin: 'up' key pressed 50 0000 <-- (cDisplayChannel::ProcessKey 1st value = lastTime.Elapsed(), 2nd value = Key 307 0032 323 0032 339 0032 355 0032 371 0032 387 0032 403 0032 /dev/input/event2: repeat 0000000100010021 <-- key repeat kicks-in 404 8000 107 0032 /dev/input/event2: repeat 0000000100010021 92 8000 /dev/input/event2: repeat 0000000100010021 60 8000 75 0032 /dev/input/event2: repeat 0000000100010021 56 8000 /dev/input/event2: repeat 0000000100010021 68 8000 75 0032 /dev/input/event2: repeat 0000000100010021 56 8000 75 0032 /dev/input/event2: repeat 0000000100010021 64 8000 /dev/input/event2: repeat 0000000100010021 60 8000 79 0032 /dev/input/event2: repeat 0000000100010021 64 8000 /dev/input/event2: repeat 0000000100010021 66 8000 73 0032 /dev/input/event2: repeat 0000000100010021 56 8000 83 0032 /dev/input/event2: repeat 0000000100010021 60 8000 /dev/input/event2: repeat 0000000100010021 60 8000 71 0032 /dev/input/event2: repeat 0000000100010021 60 8000 75 0032 /dev/input/event2: repeat 0000000100010021 60 8000 /dev/input/event2: repeat 0000000100010021 71 8000 76 0032 /dev/input/event2: repeat 0000000100010021 56 8000 76 0032 /dev/input/event2: repeat 0000000100010021 55 8000 /dev/input/event2: repeat 0000000100010021 60 8000 71 0032 /dev/input/event2: repeat 0000000100010021 56 8000 79 0032 /dev/input/event2: repeat 0000000100010021 56 8000 79 0032 71 0032 87 0032 103 0032 119 0032 135 0032 152 0032 /dev/input/event2: release 0000000100010021 <-- key released 155 4000 540 0032 556 0032 572 0032 588 0032 604 0032 621 0032 636 0032 ... 4940 0032 4956 0032 4972 0032 4989 0032 5004 0032 The 0032 (kNone) keys look suspicious to me. The are _not_ created by the remote plugin. Oliver -- -------------------------------------------------------- VDR Remote Plugin available at http://www.escape-edv.de/endriss/vdr/ --------------------------------------------------------
