Reinhard Nissl wrote: > Hi, > > Mlists wrote: > >> I'm running vdr 1.3.37 with a diseqc 2.0 switch. The problem I seem to >> have is that switching between ports on the switch doesn't work cleanly. >> Often it will not switch and give me a black screen. >> >> Can someone please confirm whether I have the right diseqc settings? >> This is what I have -- >> >> # EchoStar 7 - 119W - Port 1 >> S119.0W 99999 V 11250 t v W15 [E0 10 38 F0] >> S119.0W 99999 H 11250 t V W15 [E0 10 38 F0] >> >> # EchoStar 6/8 - 110W - Port 2 >> S110.0W 99999 V 11250 t v W15 [E0 10 38 F4] >> S110.0W 99999 H 11250 t V W15 [E0 10 38 F4] > > > Hhm, they don't look wrong, but I must admit that I cannot access > those satellites. > > You may want to try the attached patch which repeats the DiSEqC > message every 1000 ms until the tuner gets a lock on the signal. This > should avoid the black screen with an additional delay of a little bit > more then a second. > Wow, that patch seems to have done it! Thanks!! Norm
