Hi, Mlists wrote: > I'm running vdr 1.3.37 with a diseqc 2.0 switch. The problem I seem to > have is that switching between ports on the switch doesn't work cleanly. > Often it will not switch and give me a black screen. > > Can someone please confirm whether I have the right diseqc settings? > This is what I have -- > > # EchoStar 7 - 119W - Port 1 > S119.0W 99999 V 11250 t v W15 [E0 10 38 F0] > S119.0W 99999 H 11250 t V W15 [E0 10 38 F0] > > # EchoStar 6/8 - 110W - Port 2 > S110.0W 99999 V 11250 t v W15 [E0 10 38 F4] > S110.0W 99999 H 11250 t V W15 [E0 10 38 F4] Hhm, they don't look wrong, but I must admit that I cannot access those satellites. You may want to try the attached patch which repeats the DiSEqC message every 1000 ms until the tuner gets a lock on the signal. This should avoid the black screen with an additional delay of a little bit more then a second. Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:rnissl@xxxxxx -------------- next part -------------- A non-text attachment was scrubbed... Name: vdr-1.3.37-tuner3.patch Type: text/x-patch Size: 2997 bytes Desc: not available Url : http://www.linuxtv.org/pipermail/vdr/attachments/20051230/b6eaa872/vdr-1.3.37-tuner3.bin
