Thanks for your reply, I do get OSD all the time, just the actual video goes. I honestly haven't messed much with the xv video drivers, but will try and goof with them some and report back, but my main goal was to get it going with DFB but that might not be possible, I don't know! When doing DFB I get no video period I only get the VDR OSD, and when I first start it I get audio on the channel it starts on, just no video. But if I change channels all I get is OSD, I lose audio. I hope I am explaining this good enough for ya! :) I will see what I can do about the X drivers and let you know the results. Thanks again for the help. Stefan Lucke wrote: >On Samstag, 10. Dezember 2005 08:21, Chad Flynt wrote: > > >>Has anyone had any luck with Softdevice and an NVIDIA 6800Ultra? Also I >>hear of problems with like the TI4200 etc. >> >> > >Thereis a similar report on dfb-user list. > > > >>My issue with my 6800 is >>through XV I get video on whatever channel I have VDR set to start with, >>but if I change channels I lose it, and only get OSD from there on. >> >> > >But thats different. At the first time, when you get video (xv-out) do you have >video and OSD, or video only ? > >Which driver do you use with X11 ? >The binary only (from nvidia) or the one with sources from XFree, Xorg ? > > > >>And >>can't get it back without restarting VDR, it will start on any channel I >>set it to start with in the SETUP.CONF but once I change it is gone. As >>where if I use DFB which is what I would rather use, I don't get video >>at all, just OSD and AUDIO on the first channel, but again if I change >>it goes away. >> >> > >No audio ? >Only OSD ? > > > >>I am using CVS of Softdevice, DirectFB and DFB++ and have this issue. >>If anyone has any tips or tricks, they are gladly welcome! >> >> >> > > > >
