> Well, I started my EPIA project with a SkyStar2 Rev. 2.6c about a year > ago and replaced the card after 3 months by a NOVA-S for the same > reason. About a year ago the driver had the problem that for any reason > it didn't get any interrupts anymore and therefore no data for live TV. > Reloading the drivers fixed the issue but was anoying. As I said in my reply to Tony, I do not need to reload my drivers. After reloading vdr, everything works ok. So it seems more of the EPG timeout problem you mentioned in your other post. > > IIRC, the driver was under havy development (rewrite?) over the year, > but it seems that the version in 2.6.13 still has problems. Try multiple > > cat /proc/interrupts > > to see, whether the device generates any interrupts when it has reached > the NO SIGNAL state. I'll do that. > > Another idea: could it be a temperature issue which lets the device > freeze at some point so that only a reset (= reloading of drivers) can > force it back to life? No, I don't need to reload, and as far as I know, temperature is very low inside the case. I've tried it on the back of the card, but I've never felt high temperature there. Best, Maarten
