Harri Helmroos wrote: > Lauri Tischler wrote: > >> Harri Helmroos wrote: >> >>> Hello me, nice talking to myself... >>> >>> Okay, I might have rushed a bit here. >>> >>> Appears that this is _not_ a hardware problem. I found from somewhere >>> a diseqc.conf where is A and B (for a mini diseqc or alike) commands >>> applied. >>> >>> Guess what happens when I put the commands in my diseqc.conf? ZZZZAP! >>> Channels work precisely like they did before when I had single LNB's, >>> meaning it works as it should. >>> >>> But (there's always a but??), if I put for the third satellite >>> command C, vdr won't start, instead it blames me for making an error >>> in diseqc.conf. So I take that there doesn't even exist such a thing >>> as C. My question is now, how do I get 3rd satellite (13.0E in >>> position 3) to work with the 4/1 diseqc (I think it's a 1.0 protocol >>> or whatever it's called). >>> >>> Here's how it looks now, working so far with 2 first satellites: >>> >>> [diseqc.conf start] >>> S1.0W 11700 V 9750 t v W15 [E0 10 38 F0] W15 A W15 t >>> S1.0W 99999 V 10600 t v W15 [E0 10 38 F0] W15 A W15 T >>> S1.0W 11700 H 9750 t V W15 [E0 10 38 F0] W15 A W15 t >>> S1.0W 99999 H 10600 t V W15 [E0 10 38 F0] W15 A W15 T >>> >>> S5.0E 11700 V 9750 t v W15 [E0 10 38 F4] W15 B W15 t >>> S5.0E 99999 V 10600 t v W15 [E0 10 38 F4] W15 B W15 T >>> S5.0E 11700 H 9750 t V W15 [E0 10 38 F4] W15 B W15 t >>> S5.0E 99999 H 10600 t V W15 [E0 10 38 F4] W15 B W15 T >>> >>> #S13.0E 11700 V 9750 t v W15 [E0 10 38 F8] W15 t >>> #S13.0E 99999 V 10600 t v W15 [E0 10 38 F8] W15 T >>> #S13.0E 11700 H 9750 t V W15 [E0 10 38 F8] W15 t >>> #S13.0E 99999 H 10600 t V W15 [E0 10 38 F8] W15 T >>> [diseqc.conf ends] >> >> >> Forget the A and B, they are for 2-port mini-switches >> That should do it. >> >> ---- >> # Port 1 >> S1.0W 11700 V 9750 t v W15 [E0 10 38 F0] W15 t >> S1.0W 99999 V 10600 t v W15 [E0 10 38 F0] W15 T >> S1.0W 11700 H 9750 t V W15 [E0 10 38 F0] W15 t >> S1.0W 99999 H 10600 t V W15 [E0 10 38 F0] W15 T >> # Port 2 >> S5.0E 11700 V 9750 t v W15 [E0 10 38 F4] W15 t >> S5.0E 99999 V 10600 t v W15 [E0 10 38 F4] W15 T >> S5.0E 11700 H 9750 t V W15 [E0 10 38 F4] W15 t >> S5.0E 99999 H 10600 t V W15 [E0 10 38 F4] W15 T >> # Port 3 >> S13.0E 11700 V 9750 t v W15 [E0 10 38 F8] W15 t >> S13.0E 99999 V 10600 t v W15 [E0 10 38 F8] W15 T >> S13.0E 11700 H 9750 t V W15 [E0 10 38 F8] W15 t >> S13.0E 99999 H 10600 t V W15 [E0 10 38 F8] W15 T >> # Port 4 >> S19.2E 11700 V 9750 t v W15 [E0 10 38 FC] W15 t >> S19.2E 99999 V 10600 t v W15 [E0 10 38 FC] W15 T >> S19.2E 11700 H 9750 t V W15 [E0 10 38 FC] W15 t >> S19.2E 99999 H 10600 t V W15 [E0 10 38 FC] W15 T > > Thanks Lauri for your reply. Unfortunately that configuration doesn't > work with my twin-lnb's. I had that configuration from the beginning > (since vdr-1.3.24) working with my single-lnb's. > > After installing the twin-lnb's, that configuration just makes me have > to switch to a channel with h-pol before I like to watch a chan with > v-pol. Irritating problem I might say. Ummm.. by twin-lnb do you mean with two heads and one f-connector and with built in mini-switch ? What is your third lnb ? How are they connected to diseqc 4-1 switch ?
