Lauri Tischler wrote: > Harri Helmroos wrote: >> Hello me, nice talking to myself... >> >> Okay, I might have rushed a bit here. >> >> Appears that this is _not_ a hardware problem. I found from somewhere >> a diseqc.conf where is A and B (for a mini diseqc or alike) commands >> applied. >> >> Guess what happens when I put the commands in my diseqc.conf? ZZZZAP! >> Channels work precisely like they did before when I had single LNB's, >> meaning it works as it should. >> >> But (there's always a but??), if I put for the third satellite >> command C, vdr won't start, instead it blames me for making an error >> in diseqc.conf. So I take that there doesn't even exist such a thing >> as C. My question is now, how do I get 3rd satellite (13.0E in >> position 3) to work with the 4/1 diseqc (I think it's a 1.0 protocol >> or whatever it's called). >> >> Here's how it looks now, working so far with 2 first satellites: >> >> [diseqc.conf start] >> S1.0W 11700 V 9750 t v W15 [E0 10 38 F0] W15 A W15 t >> S1.0W 99999 V 10600 t v W15 [E0 10 38 F0] W15 A W15 T >> S1.0W 11700 H 9750 t V W15 [E0 10 38 F0] W15 A W15 t >> S1.0W 99999 H 10600 t V W15 [E0 10 38 F0] W15 A W15 T >> >> S5.0E 11700 V 9750 t v W15 [E0 10 38 F4] W15 B W15 t >> S5.0E 99999 V 10600 t v W15 [E0 10 38 F4] W15 B W15 T >> S5.0E 11700 H 9750 t V W15 [E0 10 38 F4] W15 B W15 t >> S5.0E 99999 H 10600 t V W15 [E0 10 38 F4] W15 B W15 T >> >> #S13.0E 11700 V 9750 t v W15 [E0 10 38 F8] W15 t >> #S13.0E 99999 V 10600 t v W15 [E0 10 38 F8] W15 T >> #S13.0E 11700 H 9750 t V W15 [E0 10 38 F8] W15 t >> #S13.0E 99999 H 10600 t V W15 [E0 10 38 F8] W15 T >> [diseqc.conf ends] > > Forget the A and B, they are for 2-port mini-switches > That should do it. > > ---- > # Port 1 > S1.0W 11700 V 9750 t v W15 [E0 10 38 F0] W15 t > S1.0W 99999 V 10600 t v W15 [E0 10 38 F0] W15 T > S1.0W 11700 H 9750 t V W15 [E0 10 38 F0] W15 t > S1.0W 99999 H 10600 t V W15 [E0 10 38 F0] W15 T > # Port 2 > S5.0E 11700 V 9750 t v W15 [E0 10 38 F4] W15 t > S5.0E 99999 V 10600 t v W15 [E0 10 38 F4] W15 T > S5.0E 11700 H 9750 t V W15 [E0 10 38 F4] W15 t > S5.0E 99999 H 10600 t V W15 [E0 10 38 F4] W15 T > # Port 3 > S13.0E 11700 V 9750 t v W15 [E0 10 38 F8] W15 t > S13.0E 99999 V 10600 t v W15 [E0 10 38 F8] W15 T > S13.0E 11700 H 9750 t V W15 [E0 10 38 F8] W15 t > S13.0E 99999 H 10600 t V W15 [E0 10 38 F8] W15 T > # Port 4 > S19.2E 11700 V 9750 t v W15 [E0 10 38 FC] W15 t > S19.2E 99999 V 10600 t v W15 [E0 10 38 FC] W15 T > S19.2E 11700 H 9750 t V W15 [E0 10 38 FC] W15 t > S19.2E 99999 H 10600 t V W15 [E0 10 38 FC] W15 T Thanks Lauri for your reply. Unfortunately that configuration doesn't work with my twin-lnb's. I had that configuration from the beginning (since vdr-1.3.24) working with my single-lnb's. After installing the twin-lnb's, that configuration just makes me have to switch to a channel with h-pol before I like to watch a chan with v-pol. Irritating problem I might say. Greets, HH
