On ke, 2005-10-26 at 21:45 +0200, Daniel Asplund wrote: > Which VDR version introduced the feature to receive several streams on > the same transponder with a DVB-S FF card? Should this work out of the > box or isn't it possible if both channels are encrypted? Conax CAM in the current VDR implementation cannot decrypt more than one stream at a time. > If it is not possible to do this, is there any easy way to limit the > card to only tune to one channel? It's done automatically by VDR if the CA field in channels.conf has e.g. "B00" (=Conax) for the channel in question. > On 10/26/05, Heikki Manninen <hma@xxxxxx> wrote: > > I have the same problem. Appeared after upgrade to 1.3.31. Currently I'm > > at 1.3.34. > > > > It is also affecting live-tv viewing. Sometimes when changing to such a > > channel, the screen stays black (with no audio) for a while before image > > appears. I think that this same delay causes VDR to exit with VDSB when > > timer starts on a channel that behaves like this. > > There are many ways you can get a VDSB error and in this case it > doesn't sound like these two problems have anything common, except for > the actual error message. > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
