Hello
recently i already reported about a wiered problem
VDR generates 2 channels.conf entries for every DVB-T channel.
Example:
VOX;RTL World:666000:I0C23D0M16B8T8G8Y0:T:27500:545:546=deu:551:0:16418:8468:8706:0
VOX;RTL World:666000:I0C23D0M16B8T8G8Y0:T:27500:0:0:0:0:16418:8468:2818:0
I would not care about it, but i get the
EPG infos only on the second entry. But there is no
video.
Why does EGP get not infos at the first entry, which looks much
less broken that the second?
Any usefull step to narrow the problem?
vdr 1.3.25 (LNBshared)
lspci says:
0000:00:09.0 0480: 1131:7146 (rev 01) TT FF DVB-S
0000:00:0a.0 0400: 109e:036e (rev 11) AverMedia DVB-T 771
0000:00:0a.1 0480: 109e:0878 (rev 11)
0000:00:0b.0 0480: 1131:7146 (rev 01) TT FF DVB-S
0000:00:0c.0 -
0000:00:0d.0 0480: 1131:7146 (rev 01) TT FF DVB-S
0000:00:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
0000:00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
0000:00:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture(rev 11)
0000:00:0b.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
0000:00:0d.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Rainer---<=====> Vertraulich
//
//
<=====>--------------ocholl, Kiel, Germany ------------
