On Mon, Jun 06, 2005 at 10:49:38PM +0200, karim wrote: > Hi List, > > I've tested the 0x261e firmware on my vdrbox : > > Firmware http://www.suse.de/~werner/test_av.tar.bz2 > Kernel 2.6.11 (MDK 10.1) > Driver CVS from 05/03/2005 > 2 x FF's dvb (Nexus) > vdr-1.3.25 > > Now, when I view a record, I can change from "pause" to "play" as many times > I want, without losing AV sync anymore. > > Thanks a lot for this great improvement ! > > Unfortunately, there is still a bug when using dvb digital output, which > isn't solved yet. When I edit a record, my hc amplifier is taking down, > sending "white noise" to the loudspeakers. This appears only a few > time after I've jumped from a mark to another, in pause mode. > Normal sound return OK when I return in play mode. Note the > problem NEVER happen when changing from play > pause or > pause > play, but ONLY when I use "jump" function. Hmmm ... seems to be a problem with your amplifier. Maybe the initial audio startup has to be increased. Btw: does this also happen if you're jumping with green/yellow or only by jumping with 7/9 between marks ?? > > Since I am note an expert, I don't know if this problem must be fixed in > vdr, driver or firmware. Do you have any idea on how this could be solved ? firmware. Werner -- AC3 loop through sound card http://bitstreamout.sourceforge.net/ Howto http://www.vdr-portal.de/board/thread.php?threadid=1958 ------------------------------------------------------------------ "Having a smoking section in a restaurant is like having a peeing section in a swimming pool." -- Edward Burr
