Rainer Zocholl wrote: > Hello > > Yesterday i set EGP timeout to 1 in the hope the LNBsharing > patch will prevent the usual deadlocks. It does not > need to do anything. > > It happens too that the box ran that hour without any recordings > instead of being powered off as usual, so EPG scan could really start. > (Hm, why 1h as minimum?) On a single card system it doesn't really make much sense to have shorter times - after all, you wouldn't even be able to watch a full length movie. Besides, if you want to start an EPG scan you can select "Scan" from the Setup/EPG menu at any time. > As you may se below, > "Starting EPG scan" starts at channel 0 (zero? What is channel 0?), This may be a dummy channel that's used to tune to a new transponder. It doesn't have a number. > switches to channel 1, that's Ok... > got new transponders/programs, that's OK. (so many new to day?) > then VDR switches to channel 279! > Why 279 and not 2? What's that? > > The next timer event would be a timer to record channel 27 at 10:52 > but the switch attempt occurs at 10:42:18 > and obviuosly leads VDR into a deep endless loop. > > channel 279 is > OLD GOLD;PREMIERE:11720:hC34:S19.2E:27500:0:336=deu:0:1801,1722,1702:167:133:3:0 > > Never ever tuned to 279 (encrypted) channel, no timer except > the one in approx 10 minutes at channel 27 ( an ASCII buffer Bug? *27*9?) Well, since there is a patch involved that may well interfere with all this I'd say you should test without that patch first and see if it happens there, too. > 09:09:08 [8593]: info: Channel locked by LNB! > 09:09:58 [8600]: changing name of channel 312 from 'D 4 - 07:45,;' to 'D 4 - 09:30,;' > 09:09:58 [8600]: linking channel 118 from 305 308 304 415 310 313 312 311 309 to 305 308 304 415 310 313 311 312 309 > ... > 09:40:48 [8593]: Power button pressed > 09:40:48 [8593]: next timer event at Mon Jun 6 10:52:00 2005 > 09:40:48 [8593]: confirm: Press any key to cancel shutdown > 09:40:54 [8593]: confirmed > ... > 10:00:57 [8593]: next timer event at Mon Jun 6 10:52:00 2005 > ... > 10:40:37 [8597]: changing pids of channel 160 from 901+901:902:204 to 701+701:702:204 > 10:41:34 [8593]: info: Starting EPG scan > 10:41:36 [8593]: switching to channel 0 > 10:41:36 [22711]: TS buffer on device 1 thread ended (pid=22711, tid=2752525) > 10:41:36 [22710]: buffer stats: 4136 (0%) used > 10:41:36 [22710]: receiver on device 1 thread ended (pid=22710, tid=2736140) > 10:41:36 [8593]: buffer stats: 0 (0%) used > 10:41:37 [8603]: changing pids of channel 636 from 0+0:0:0 to 32+32:33:0 > 10:41:37 [8603]: changing pids of channel 637 from 0+0:0:0 to 70+70:71:54 > 10:41:38 [8603]: changing pids of channel 638 from 0+0:0:0 to 0+0:73:0 > 10:41:38 [8603]: changing pids of channel 639 from 0+0:0:0 to 61+61:62:0 > 10:41:41 [8603]: changing pids of channel 646 from 0+0:0:0 to 41+41:40:0 > 10:41:42 [8603]: changing pids of channel 647 from 0+0:0:0 to 0+0:58=eng:0 > 10:41:42 [8603]: changing pids of channel 648 from 0+0:0:0 to 0+0:59:0 > 10:42:00 [8600]: creating new channel 'TVP Kultura,;TVP' on S19.2E transponder 110861 with id 1-1059-7101-0 > 10:42:00 [8600]: creating new channel 'TV Polonia,;TVP Service' on S19.2E transponder 110861 with id 1-1059-7100-0 > 10:42:00 [8600]: changing pids of channel 814 from 0+0:0:0 to 516+8190:690=pol:580 > 10:42:00 [8600]: changing pids of channel 815 from 0+0:0:0 to 514+8190:670=pol:578 > 10:42:02 [8603]: creating new channel 'Cartoon Network/TCM,Cartoon Network/TCM;UPC Direct' on S19.2E transponder 110920 with id 1-1063-20341-0 > 10:42:02 [8603]: creating new channel 'Boomerang,Boomerang;UPC Direct' on S19.2E transponder 110920 with id 1-1063-20343-0 > 10:42:02 [8603]: creating new channel 'Viasat Explorer,Viasat Explorer;UPC Direct' on S19.2E transponder 110920 with id 1-1063-20344-0 > 10:42:02 [8603]: creating new channel 'Viasat History,Viasat History;UPC Direct' on S19.2E transponder 110920 with id 1-1063-20345-0 > 10:42:02 [8603]: creating new channel 'AXN,AXN;UPC Direct' on S19.2E transponder 110920 with id 1-1063-20346-0 > 10:42:02 [8603]: creating new channel 'Cinemax,Cinemax;UPC Direct' on S19.2E transponder 110920 with id 1-1063-20347-0 > 10:42:02 [8603]: creating new channel 'Minimax/A+,Minimax/A+;UPC Direct' on S19.2E transponder 110920 with id 1-1063-20348-0 > 10:42:02 [8603]: creating new channel 'CT1,CT1;UPC Direct' on S19.2E transponder 110920 with id 1-1063-20342-0 > 10:42:02 [8603]: creating new channel 'CT2,CT2;UPC Direct' on S19.2E transponder 110920 with id 1-1063-20350-0 > 10:42:02 [8603]: creating new channel 'Film+,Film+;UPC Direct' on S19.2E transponder 110920 with id 1-1063-20349-0 > 10:42:02 [8603]: changing pids of channel 818 from 0+0:0:0 to 251+251:260=hun,261=cze:270 > 10:42:02 [8603]: changing caids of channel 818 from 0 to D02 > 10:42:02 [8603]: changing pids of channel 819 from 0+0:0:0 to 301+301:310=hun,311=cze:320 > 10:42:02 [8603]: changing caids of channel 819 from 0 to D02 > 10:42:02 [8603]: changing pids of channel 820 from 0+0:0:0 to 351+351:360=hun,361=cze,362=eng:370 > 10:42:02 [8603]: changing caids of channel 820 from 0 to D02 > 10:42:03 [8603]: changing pids of channel 821 from 0+0:0:0 to 401+401:410=hun,411=cze,412=eng:0 > 10:42:03 [8603]: changing caids of channel 821 from 0 to D02 > 10:42:03 [8603]: changing caids of channel 821 from 0 to D02 > 10:42:03 [8603]: changing pids of channel 822 from 0+0:0:0 to 451+451:460=hun:0 > 10:42:03 [8603]: changing caids of channel 822 from 0 to D02 > 10:42:03 [8603]: changing pids of channel 825 from 0+0:0:0 to 501+501:511=cze:0 > 10:42:03 [8603]: changing caids of channel 825 from 0 to D02 > 10:42:03 [8603]: changing pids of channel 824 from 0+0:0:0 to 551+551:561=cze:570 > 10:42:03 [8603]: changing caids of channel 824 from 0 to D02 > 10:42:04 [8603]: changing pids of channel 816 from 0+0:0:0 to 101+101:110=hun,112=eng:120 > 10:42:04 [8603]: changing caids of channel 816 from 0 to D02 > 10:42:04 [8603]: changing pids of channel 823 from 0+0:0:0 to 151+151:161=cze:170 > 10:42:04 [8603]: changing caids of channel 823 from 0 to D02 > 10:42:04 [8603]: changing pids of channel 817 from 0+0:0:0 to 201+201:210=hun,212=eng,213=pol:0 > 10:42:04 [8603]: changing caids of channel 817 from 0 to D02 > 10:42:18 [8593]: switching to channel 279 > 10:42:18 [8593]: info: Channel not available! > 10:42:20 [8593]: switching to channel 279 > 10:44:20 [8593]: info: Channel not available! > 10:44:22 [8593]: switching to channel 279 > 10:44:22 [8593]: info: Channel not available! > 10:44:24 [8593]: switching to channel 279 > 10:44:24 [8593]: info: Channel not available! > 10:44:26 [8593]: switching to channel 279 > 10:44:26 [8593]: info: Channel not available! > 10:44:28 [8593]: switching to channel 279 > 10:44:28 [8593]: info: Channel not available! > 10:44:30 [8593]: switching to channel 279 > 10:44:30 [8593]: info: Channel not available! > 10:44:32 [8593]: switching to channel 279 > 10:44:32 [8593]: info: Channel not available! > 10:44:34 [8593]: switching to channel 279 > > > > 10:51:56 [8593]: switching to channel 279 > 10:51:56 [8593]: info: Channel not available! > 10:51:58 [8593]: switching to channel 279 > 10:51:58 [8593]: info: Channel not available! > 10:52:00 [8593]: switching to channel 279 > 10:52:00 [8593]: info: Channel not available! > 10:52:02 [8593]: switching to channel 279 > 10:52:02 [8593]: info: Channel not available! > 10:52:04 [8593]: switching to channel 279 > 10:52:04 [8593]: info: Channel not available! > 10:52:06 [8593]: switching to channel 279 > 10:52:06 [8593]: info: Channel not available! > 10:52:08 [8593]: switching to channel 279 > 10:52:08 [8593]: info: Channel not available! > > > > msi:~# ps fax | grep vdr > 29410 pts/1 S+ 0:00 \_ grep vdr > 8593 ? S 5:46 ./vdr -v /video0 -P osdteletext -P femon -l 3 -w 60 -s /video0/pwroff /root/video/VDR/ > 8595 ? S 0:00 \_ ./vdr -v /video0 -P osdteletext -P femon -l 3 -w 60 -s /video0/pwroff /root/video/VDR/ > 8596 ? S 0:00 \_ ./vdr -v /video0 -P osdteletext -P femon -l 3 -w 60 -s /video0/pwroff /root/video/VDR/ > 8597 ? RN 34:45 \_ ./vdr -v /video0 -P osdteletext -P femon -l 3 -w 60 -s /video0/pwroff /root/video/VDR/ > 8599 ? S 0:00 \_ ./vdr -v /video0 -P osdteletext -P femon -l 3 -w 60 -s /video0/pwroff /root/video/VDR/ > 8600 ? SN 30:26 \_ ./vdr -v /video0 -P osdteletext -P femon -l 3 -w 60 -s /video0/pwroff /root/video/VDR/ > 8602 ? S 0:00 \_ ./vdr -v /video0 -P osdteletext -P femon -l 3 -w 60 -s /video0/pwroff /root/video/VDR/ > 8603 ? SN 31:34 \_ ./vdr -v /video0 -P osdteletext -P femon -l 3 -w 60 -s /video0/pwroff /root/video/VDR/ > 8605 ? S 0:00 \_ ./vdr -v /video0 -P osdteletext -P femon -l 3 -w 60 -s /video0/pwroff /root/video/VDR/ > 8606 ? SN 9:03 \_ ./vdr -v /video0 -P osdteletext -P femon -l 3 -w 60 -s /video0/pwroff /root/video/VDR/ > 8607 ? S 0:00 \_ ./vdr -v /video0 -P osdteletext -P femon -l 3 -w 60 -s /video0/pwroff /root/video/VDR/ > msi:~# kill 8593 > msi:~# kill 8593 > > a kill -9 was required... > > vdr 1.3.25 only patch LNBsharing. Does the problem also occur _without_ that patch (plain vanilla VDR)? Klaus
