El Martes, 31 de Mayo de 2005 22:20, Andreas Regel escribi?: > Hello, > > here is a first release of the pvrinput plugin for VDR. It uses a > Hauppauge PVR card (supported by ivtv drivers) as an input device for > VDR. I am using it with driver version 0.2.0rc3j and encoder firmware > 2.04.211. > > I have written this plugin because I was a bit unhappy about some things > with analogtv. Motivated by a mail from Lars Altenhain on this list I > tried an approach a bit different from the analogtv plugin. The reading > of the PES data an the conversion to TS is done in a thread in the > background without interrupting it on channel switch. The packets are > then read out and delivered to VDR in the GetTSPacket function. > > Additionally the plugin reads the teletext data from the vbi device > (/dev/vbi0 is hardcoded at the moment) and converts it to TS packets > that the osdteletext plugin is able to receive. Sometimes one or two > lines are wrong but its working quite good here. > > Compared to the analogtv plugin the following is better here with my > configuration (Hauppauge PVR 250, Kernel 2.6, ivtv 0.2.0rc3j): > - Faster channel switching > - no video flickerung after channel switch > - just minimal stuttering in sound after channel switch > - and of course teletext support > > Expect problems to get it running in your environment, especially > regardings device configuration :). > > You can find it here: > http://home.arcor.de/andreas.regel/files/vdr-pvrinput-0.0.1.tgz > > Andreas It works fine. I make a patch to append radio support. Perhaps you could integrate better way. For radio channels video pid = 0 in channels.conf The patch in ivtv.h is for amd64 vbi support. Thanks. Jose Alberto -------------- next part -------------- A non-text attachment was scrubbed... Name: pvrinput-0.0.1.radio.patch Type: text/x-diff Size: 4916 bytes Desc: not available Url : http://www.linuxtv.org/pipermail/vdr/attachments/20050603/d9e5ed18/pvrinput-0.0.1.radio-0001.bin
