Markus_Ehrnsperger@xxxxxxxx says... > so if I switch from > > S19.2E 99999 H 10600 t V W15 [E0 10 38 F3] W15 T > > to > > S13E 99999 V 10600 t v W15 [E0 10 38 F5] W15 B W15 T > > than the second DVB card will switch the tone off (while the first one is > still sending the tone), the second DVB card will have low voltage (while the > first one has still high voltage), than the second DVB card will send some > DiSEqC sequences (disturbed by the tone of the first one) and will switch the > tone on again. Than the first DVB card will send signals, again disturbed by > the tone of the second DVB card. > > Would it be possible to change this and make sure no DVB card sends the tone > as long as DiSEqC sequences are sent? I will check this. Until now I implemented most of the LNB-sharing functions in device.c and tried to avoid changes in lower abstraction levels. If this does not need large changes to vdr or too many dirty hacks I will implement this in a future version. For the moment a simple line-splitter (like http://www.reichelt.de/index.html?ARTIKEL=SVE%202-01;ARTIKELID=24943; ) should work for your configuration, as it passes the LNB-configuration- tones of only one card (AFAIK). Matthias.
