>> I've figured out if I replay the file with vdr, the bso(replay) thread
>> doesn't start with newer recordings
>
> And you have choosen the AC3 audio track during replay the
> recording with the green button? I've this question because
> this is the first report of that kind.
yes i've tested it several times.
I've tracked down the problem a little bit. Data is sent to the plugin
but the replay thread doesn't start because ScanPayOfPS1 fails.
I've commented out these two lines:
case 0x0b:
// if ((uint_16)dvb != AC3magic)
// break;
and now it works.
> The bitformat over the dvb-card is exactly the same as in the bso
> plugin. The only difference is that the bso plugin force the
> sound card to set the nonlinear status bit in the S/P-DIF
> transport layer. This can not be done in the firmware of the
> dvb-card. Also the S/P-DIF transport layer is not identical with
> the PCM stream its self, e.g. for every PCM word (16bit, 20bit,
> 24bit) a 32bit word in the S/P-DIF transport layer is used.
I think it's the nonlinear bit. My receiver switches to DD,
shows the correct stream information but i get no sound.
It's like i've pressed the mute button.
Roland
