Hi Ahmad, On 28.10.24 17:44, Ahmad Fatoum wrote: > Hi, > > On 28.10.24 17:17, Stefan Kerkmann wrote: >> These two patches are the outcome of an investigation why loading a >> fitimage from an eMMC took nearly 7s - the sheer amount of generated >> debugging messages slowed down the system by a factor of ~21 with >> KConfig options: >> >> CONFIG_COMPILE_LOGLEVEL=7 >> CONFIG_DEFAULT_LOGLEVEL=6 >> >> Which is the current default combination for barebox. >> >> Before: >> >> Booting entry 'system0' >> FIT: Reading time: 6722 ms >> >> After: >> >> Booting entry 'system0' >> FIT: Reading time: 324 ms > > This is the time with these two patches applied or with > compile log level changed? > This is the time with both patches applied and the mentioned default log levels. Cheers, Stefan > Cheers, > Ahmad > >> >> Signed-off-by: Stefan Kerkmann <s.kerkmann@xxxxxxxxxxxxxx> >> --- >> Stefan Kerkmann (2): >> block: downgrade noisy debug calls to verbose debug >> fs: ramfs: downgrade noisy debug calls to verbose debug >> >> common/block.c | 4 ++-- >> fs/ramfs.c | 10 +++++----- >> 2 files changed, 7 insertions(+), 7 deletions(-) >> --- >> base-commit: 59658c877bcc605fe3ca36653b4f40f57856b81a >> change-id: 20241028-fix-noisy-debug-calls-a6d6185be705 >> >> Best regards, > > -- Pengutronix e.K. | Stefan Kerkmann | Steuerwalder Str. 21 | https://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-128 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
