Hi, On 28.10.24 17:17, Stefan Kerkmann wrote: > These two patches are the outcome of an investigation why loading a > fitimage from an eMMC took nearly 7s - the sheer amount of generated > debugging messages slowed down the system by a factor of ~21 with > KConfig options: > > CONFIG_COMPILE_LOGLEVEL=7 > CONFIG_DEFAULT_LOGLEVEL=6 > > Which is the current default combination for barebox. > > Before: > > Booting entry 'system0' > FIT: Reading time: 6722 ms > > After: > > Booting entry 'system0' > FIT: Reading time: 324 ms This is the time with these two patches applied or with compile log level changed? Cheers, Ahmad > > Signed-off-by: Stefan Kerkmann <s.kerkmann@xxxxxxxxxxxxxx> > --- > Stefan Kerkmann (2): > block: downgrade noisy debug calls to verbose debug > fs: ramfs: downgrade noisy debug calls to verbose debug > > common/block.c | 4 ++-- > fs/ramfs.c | 10 +++++----- > 2 files changed, 7 insertions(+), 7 deletions(-) > --- > base-commit: 59658c877bcc605fe3ca36653b4f40f57856b81a > change-id: 20241028-fix-noisy-debug-calls-a6d6185be705 > > Best regards, -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
