Re: [PATCH] ARM: dts: phycore-stm32mp15: Use upstream dts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 20, 2023 at 01:29:32PM +0200, Sascha Hauer wrote:
> The phycore-stm32mp15 board has long been mainlined. Switch the
> board to use the upstream dts files.
> 
> This at least has the effect that now the PMIC is probed as our
> downstream dts hasn't enabled the i2c4 node.
> 
> Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> ---
>  .../dts/stm32mp157c-phycore-stm32mp1-3.dts    |  16 +-
>  ...stm32mp157c-phycore-stm32mp15-pinctrl.dtsi |  92 ------
>  .../stm32mp157c-phycore-stm32mp15-som.dtsi    | 271 ------------------
>  3 files changed, 2 insertions(+), 377 deletions(-)
>  delete mode 100644 arch/arm/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi
>  delete mode 100644 arch/arm/dts/stm32mp157c-phycore-stm32mp15-som.dtsi
> 
> diff --git a/arch/arm/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi
> deleted file mode 100644
> index aa41006c23..0000000000
> --- a/arch/arm/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi
> +++ /dev/null
> @@ -1,92 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
> -/*
> - * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
> - * Author: Dom VOVARD <dom.vovard@xxxxxxxxx>.
> - */
> -#include <arm/st/stm32mp15-pinctrl.dtsi>
> -
> -&ethernet0_rgmii_pins_a {
> -	pins1 {
> -		pinmux = <STM32_PINMUX('G', 4, AF11)>,	/* ETH_RGMII_GTX_CLK */
> -			 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
> -			 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
> -			 <STM32_PINMUX('C', 2, AF11)>,	/* ETH_RGMII_TXD2 */
> -			 <STM32_PINMUX('E', 2, AF11)>,	/* ETH_RGMII_TXD3 */
> -			 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
> -			 <STM32_PINMUX('A', 2, AF11)>,	/* ETH_MDIO */
> -			 <STM32_PINMUX('C', 1, AF11)>;	/* ETH_MDC */
> -		bias-disable;
> -		drive-push-pull;
> -		slew-rate = <2>;
> -	};

This is correct, but upstream dts currently uses:

	<STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */

instead of:

	<STM32_PINMUX('G', 4, AF11)>,  /* ETH_RGMII_GTX_CLK */

I'll fix that up here and send a patch for the Kernel to get this fixed
upstream.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |




[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux