Re: [PATCH v2] ARM: i.MX8M: esdctl: split memory banks for devices with >4G

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 31.08.23 16:47, Marco Felsch wrote:
> At the moment the whole available memory is added to one single memory
> bank "ram0". This can cause barebox chainload issues on devices with a
> huge amount of memory like the i.MX8MP-EVK which has 6G of RAM if the
> barebox pbl binary is to large.
> 
> The reason for this issues is that memory_bank_first_find_space()
> returns the memory area with the largest amount of free space on the
> first memory bank. So in case of Debix SOM-A 8G and i.MX8MP-EVK 6G this
> is the area crossing the 4G boundary. This cause the barebox pbl code to
> trigger a MMU exception once the early MMU gets enabled which is
> configured for sizes <=4G.
> 
> Split the memory space into two memory banks: "ram0" and "ram1" to fix
> this issue.
> 
> Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> ---
> v2:
> - drop add_mem() usage and use arm_add_mem_device() directly
> 
>  arch/arm/mach-imx/esdctl.c | 23 +++++++++++++++++++----
>  1 file changed, 19 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/esdctl.c b/arch/arm/mach-imx/esdctl.c
> index 1798ad48e50a..7f313b2337ae 100644
> --- a/arch/arm/mach-imx/esdctl.c
> +++ b/arch/arm/mach-imx/esdctl.c
> @@ -510,16 +510,31 @@ static resource_size_t imx8m_ddrc_sdram_size(void __iomem *ddrc, unsigned buswid
>  				   reduced_adress_space, mstr);
>  }
>  
> +static int _imx8m_ddrc_add_mem(void *mmdcbase, struct imx_esdctl_data *data,
> +			       unsigned int buswidth)
> +{
> +	resource_size_t size = imx8m_ddrc_sdram_size(mmdcbase, buswidth);
> +	resource_size_t size0, size1;
> +	int ret;
> +
> +	size0 = min_t(resource_size_t, SZ_4G - MX8M_DDR_CSD1_BASE_ADDR, size);
> +	size1 = size - size0;
> +
> +	ret = arm_add_mem_device("ram0", data->base0, size0);
> +	if (ret || size1 == 0)
> +		return ret;
> +
> +	return arm_add_mem_device("ram1", SZ_4G, size1);

This gives a warning when compiling the file for 32-bit, because resource_size_t
is 32-bit there, while SZ_4G is always an unsigned long long.

> +}
> +
>  static int imx8m_ddrc_add_mem(void *mmdcbase, struct imx_esdctl_data *data)
>  {
> -	return arm_add_mem_device("ram0", data->base0,
> -			   imx8m_ddrc_sdram_size(mmdcbase, 32));
> +	return _imx8m_ddrc_add_mem(mmdcbase, data, 32);
>  }
>  
>  static int imx8mn_ddrc_add_mem(void *mmdcbase, struct imx_esdctl_data *data)
>  {
> -	return arm_add_mem_device("ram0", data->base0,
> -			   imx8m_ddrc_sdram_size(mmdcbase, 16));
> +	return _imx8m_ddrc_add_mem(mmdcbase, data, 16);
>  }
>  
>  static resource_size_t imx7d_ddrc_sdram_size(void __iomem *ddrc)

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |





[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux