DON'T USE! Unfortunately there is a nasty bug in this release which breaks console output on all boards that use the stdout-path device tree property without ':' to separate the port from the baudrate, which is what the majority of boards does. There'll be a stable update soon. Sascha On Thu, Feb 23, 2023 at 09:55:55AM +0100, Sascha Hauer wrote: > > barebox-2023.02.0 is out. > > This time we have once again some progress with DSA: barebox gained > rtl8365mb switch support and I2C support for the ksz9477. This has > the nice side effect that we now have regmap_i2c and regmap_spi support. > Also there's a new NAND driver for Atmel SoCs with better device tree > support freshly imported from Linux. > If you ever wanted to parse JSON in barebox, you now have the > possibility to do so as Ahmad integrated jsmn into barebox. > The developer visible changes include that we dropped the _d suffix we > had on several struct types, most prominently struct device_d has become > struct device and struct driver_d has become struct driver. The old > name is still around as an alias, but it's a good idea to update out of > tree patches as the alias will be dropped at some point. > Also worth noting is that the default image compression algorithm > changed from LZO to LZ4. This has become necessary as LZO didn't see > any updates since 2017 and tools like Yocto begin dropping support > for LZO. > > As usual, see below for a full list of changes. > > Have Fun! > Sascha > > Ahmad Fatoum (123): > RISC-V: start: print debugging info when CONFIG_DEBUG_INITCALLS > pbl: Add Kconfig option to enable DEBUG globally in PBL > mci: only write blocks when card out of programming mode > ARM: asm: simplify arm_mem_stack_top > mci: sdhci: arasan: fix probing eMMC without no-sd > ARM: dts: fix wrong display-timings native-mode binding > video: vpl: don't print only skipped vpl endpoints > clk: imx: set CLK_SET_RATE_NO_REPARENT for all muxes > clk: mux: forward round/set rate to parent if CLK_SET_RATE_PARENT > ARM: i.MX6: skov: refactor LVDS/parallel device tree fixups > ARM: i.MX6: skov: fix LVDS deep probe > ARM: configs: imx_v7_defconfig: enable some useful options > common: deep-probe: write deep probe enabled message to log > net: dsa: ksz9477: fix confusing message detecting KSZ9893 compatible > net: dsa: ksz9477: match microchip,ksz8563 compatible > ARM: rockchip: make ATF installation optional > regulator: rk808: simplify one error branch with dev_err_probe > asm-generic: define IOMEM for assembly as well > of: gpio: include <of.h> in <of_gpio.h> > gpiolib: use signed int for gpio in gpiod_set_value > gpiolib: implement dev_gpiod_get_index > gpiolib: implement gpiod_get_value > driver: add of_match_table as alias to of_compatible > regulator: scmi: rename struct scmi_regulator::device_node to of_node > vsprintf: support %pOF format specifier > include: driver: make dev_(get_priv|is_probed) argument const pointer > include: sync io-64-nonatomic-*.h headers with Linux > clk: add prepare/unprepare helpers > of: provide of_node_get and of_node_put stubs > include: linux/slab.h: define krealloc/kstrdup > barebox-wrapper: define MODULE_DEVICE_TABLE > ARM: at91: sama5: switch to nonnaked entry functions > ARM: at91: sama5d4: add entry point helpers > lib: add jsmn JSON parser support > lib: extend jsmn with simple JSONPath lookup helpers > vsprintf: implement %pJP for printing JSONPaths > test: self: add json parser test > net: designware: eqos: implement set_promisc callback > include: linux/iopoll.h: silence warning when timeout_us contains * > pinctrl: stm32: fix pinctrl/gpio dependency ordering > net: bcmgenet: fix warning when building for 32-bit > ARM: rpi: defconfig: enable Raspberry Pi 4 drivers in 32-bit config > ARM: switch open-coded instances to platform_mem_driver > net: e1000: don't use nanosecond constants in readl_poll_timeout > firmware: Kconfig: unify whitespace used for indentation > mci: atmel_mci: fix off-by-1000 in poll timeout > mci: atmel_mci: don't print error messages when probing SDIO > mtd: consult CONFIG_OFDEVICE in mtd_get_of_node > ARM: at91: sama5d4: enable for DT use > net: macb: match atmel,sama5d4-gem compatible > i2c: at91: extend for SAMA5D4 support > eeprom: at24: add 24mac402/602 support > driver: always ensure probe of RAM registered with mem_platform_driver > common: deep-probe: don't build without CONFIG_OFDEVICE > pinctrl: at91: make deep-probe compatible > ARM: at91: make bootsource code generic to all SAMA5 > ARM: at91: SAMA5D4: add Wifx L1 support > ARM: i.MX8M: bootrom-cmd: clean up pointer casting > ARM: i.MX8M: bootrom: access OCRAM directly if running in EL3 > regmap: consolidate reg/val format into regmap_format > regmap: support formatted read and write > regmap: port regmap_init_spi > regmap: factor out regmap cdev size calculation > net: dsa: ksz9477: switch to regmap_init_spi > net: dsa: ksz9477: create regmap cdev for switch registers > drivers: base: regmap: introduce REGMAP_I2C > dev: add dev_bus_is_spi/i2c helpers > net: dsa: ksz9477: refactor to prepare i2c support > regmap: i2c: use formatted I/O > net: ksz9477: add I2C support > driver: drop no longer used RW_SIZE/_MASK macros > crypto: caam - sync 64-bit accessors with Linux > crypto: caam - add job ring accessors from Linux > crypto: caam - make command constants unsigned > crypto: caam - implement early PBL init > common: add new CONFIG_HAVE_OPTEE symbol > ARM: i.MX8M: init CAAM when CONFIG_FSL_CAAM_RNG_PBL_INIT > asm-generic: io.h: sync with Linux > mtd: nand: base: implement nand_gpio_waitrdy > mtd: nand: prefix enum nand_ecc_algo constants with NAND_ECC_ALGO_ > mtd: nand: rename nand_device::eccreq to Linux' ecc.requirements > mtd: nand: define nand_get_(small|large)_page_ooblayout > mtd: nand: define nand_interface_is_sdr > mtd: nand: provide Linux' struct nand_ecc_ctrl::engine_type > driver: implement dev_request_resource > lib: provide stub Linux "generic" allocator API > state: backend: direct: open backend in read-only mode if possible > of: implement of_device_enable_by_alias > mfd: add atmel-smc driver > memory: add Atmel EBI driver > mtd: nand: atmel: import Linux NAND controller driver > ARM: AT91: sama5d3_xplained: switch to upstream binding > mtd: nand: drop DT support in legacy driver > ARM: AT91: sama5d3: always read memory size from controller > of: platform: call struct device::detect in of_device_create_on_demand > i2c: write debug print when registering any i2c client > i2c: implement detect callback > net: eth: skip opening disabled interfaces when going interactive > ARM: stm32mp: odyssey-som: use upstream device trees > driver: alias of_match_ptr and DRV_OF_COMPAT > gpiolib: implement gpio_direction_input/output > net: dsa: rename dsa_ops to dsa_switch_ops > net: dsa: factor out dsa_port_alloc helper > net: dsa: populate struct dsa_port::index/dev members > net: dsa: always call port_pre_enable before port_enable > net: dsa: add some helpers to ease porting kernel drivers > net: dsa: add struct dsa_switch::priv member for driver use > net: dsa: add Realtek (rtl8365mb/rtl8366rb) switch support > net: dsa: realtek: support enabling only one of the drivers > net: dsa: ksz8873: fix mismatched return value > include: linux/printk: implement pr_*_once macros > fs: tftp: print message when stack can't keep us with TFTP windowsize > include: printk: retire printk_once for pr_debug_once > fs: align write return codes with POSIX > of: describe third arg of of_property_write_bool in kerneldoc > kwboot: add missing header to fix musl build > ARM: <asm/barebox-arm.h>: drop undefined barebox_arm_get_boarddata() > ARM: rockchip: add missing header to <mach/rockchip.h> > sandbox: fix linker warnings with newer ld > of: split part of of_get_stdoutpath into of_find_node_by_chosen > bootsource: use /chosen instead of /aliases/barebox,bootsource- > ARM: stm32mp: much enlarge very early stack size > Documentation: i.MX8M: add EVK barebox installation documentation > > Johannes Schneider (1): > ARM: i.MX8M: separate function call for clock_init > > Kilian Strasser (1): > pinctrl: rockchip: fix get_value > > Lucas Stach (1): > clk: imx8mp: add USB suspend clock > > Marcin Niestroj (1): > ARM: rpi: parse memory from vc fdt > > Marco Felsch (1): > pbl: set IMAGE_COMPRESSION per default to lz4 > > Maxim Kochetkov (1): > serial: ns16550: move iomem/ioport init after clock init > > Oleksij Rempel (8): > ARM: imx6sx: udoo-neo: port to driver model > ARM: imx6sx: udoo-neo: enable deep probe support > ARM: imx6sx: udoo-neo: fix board compatible > ARM: imx6sx: udoo-neo: configure GPIO pins for board auto detection. > ARM: imx6sx: udoo-neo: add version detection support > ARM: imx6sx: udoo-neo: enable memory size auto detection > ARM: imx6sx: udoo-neo: fix gpt timer configuration > ARM: imx6sx: udoo-neo: add barebox update handler support > > Sascha Hauer (30): > dts: update to v6.1 > dts: update to v6.2-rc1 > Rename device_d::device_node to device_d::of_node > Rename struct device_d to device > Rename struct driver_d to driver > Rename struct fs_device_d to fs_device > Rename struct fs_driver_d to fs_driver > Merge branch 'for-next/struct-rename' into for-next/gpio > Merge branch 'for-next/struct-rename' into for-next/kernelcode-helpers > Merge branch 'for-next/struct-rename' into for-next/at91 > dts: update to v6.2-rc3 > mci: Add more respone types > mci: handle SDIO cards gracefully > ARM: dts: rpi3: Enable sdhci controller > Merge branch 'for-next/struct-rename' into for-next/misc-struct-rename > ARM: dts: remove duplicate reserved-memory nodes > dts: update to v6.2-rc4 > Merge branch 'for-next/kernelcode-helpers' into HEAD > Merge branch 'for-next/gpio' into HEAD > Merge branch 'for-next/at91' > Merge branch 'for-next/caam' > Merge branch 'for-next/dts' > Merge branch 'for-next/imx' > Merge branch 'for-next/jsmn' > Merge branch 'for-next/misc' > Merge branch 'for-next/misc-struct-rename' > Merge branch 'for-next/struct-rename' > gpio: Fix unused variable warning > Revert "sandbox: fix linker warnings with newer ld" > Release v2023.02.0 > > Ulrich Ölmann (1): > of: partition: moan if adding a partition failed > > -- > Pengutronix e.K. | | > Steuerwalder Str. 21 | http://www.pengutronix.de/ | > 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
