barebox-2023.02.0 is out.
This time we have once again some progress with DSA: barebox gained
rtl8365mb switch support and I2C support for the ksz9477. This has
the nice side effect that we now have regmap_i2c and regmap_spi support.
Also there's a new NAND driver for Atmel SoCs with better device tree
support freshly imported from Linux.
If you ever wanted to parse JSON in barebox, you now have the
possibility to do so as Ahmad integrated jsmn into barebox.
The developer visible changes include that we dropped the _d suffix we
had on several struct types, most prominently struct device_d has become
struct device and struct driver_d has become struct driver. The old
name is still around as an alias, but it's a good idea to update out of
tree patches as the alias will be dropped at some point.
Also worth noting is that the default image compression algorithm
changed from LZO to LZ4. This has become necessary as LZO didn't see
any updates since 2017 and tools like Yocto begin dropping support
for LZO.
As usual, see below for a full list of changes.
Have Fun!
Sascha
Ahmad Fatoum (123):
RISC-V: start: print debugging info when CONFIG_DEBUG_INITCALLS
pbl: Add Kconfig option to enable DEBUG globally in PBL
mci: only write blocks when card out of programming mode
ARM: asm: simplify arm_mem_stack_top
mci: sdhci: arasan: fix probing eMMC without no-sd
ARM: dts: fix wrong display-timings native-mode binding
video: vpl: don't print only skipped vpl endpoints
clk: imx: set CLK_SET_RATE_NO_REPARENT for all muxes
clk: mux: forward round/set rate to parent if CLK_SET_RATE_PARENT
ARM: i.MX6: skov: refactor LVDS/parallel device tree fixups
ARM: i.MX6: skov: fix LVDS deep probe
ARM: configs: imx_v7_defconfig: enable some useful options
common: deep-probe: write deep probe enabled message to log
net: dsa: ksz9477: fix confusing message detecting KSZ9893 compatible
net: dsa: ksz9477: match microchip,ksz8563 compatible
ARM: rockchip: make ATF installation optional
regulator: rk808: simplify one error branch with dev_err_probe
asm-generic: define IOMEM for assembly as well
of: gpio: include <of.h> in <of_gpio.h>
gpiolib: use signed int for gpio in gpiod_set_value
gpiolib: implement dev_gpiod_get_index
gpiolib: implement gpiod_get_value
driver: add of_match_table as alias to of_compatible
regulator: scmi: rename struct scmi_regulator::device_node to of_node
vsprintf: support %pOF format specifier
include: driver: make dev_(get_priv|is_probed) argument const pointer
include: sync io-64-nonatomic-*.h headers with Linux
clk: add prepare/unprepare helpers
of: provide of_node_get and of_node_put stubs
include: linux/slab.h: define krealloc/kstrdup
barebox-wrapper: define MODULE_DEVICE_TABLE
ARM: at91: sama5: switch to nonnaked entry functions
ARM: at91: sama5d4: add entry point helpers
lib: add jsmn JSON parser support
lib: extend jsmn with simple JSONPath lookup helpers
vsprintf: implement %pJP for printing JSONPaths
test: self: add json parser test
net: designware: eqos: implement set_promisc callback
include: linux/iopoll.h: silence warning when timeout_us contains *
pinctrl: stm32: fix pinctrl/gpio dependency ordering
net: bcmgenet: fix warning when building for 32-bit
ARM: rpi: defconfig: enable Raspberry Pi 4 drivers in 32-bit config
ARM: switch open-coded instances to platform_mem_driver
net: e1000: don't use nanosecond constants in readl_poll_timeout
firmware: Kconfig: unify whitespace used for indentation
mci: atmel_mci: fix off-by-1000 in poll timeout
mci: atmel_mci: don't print error messages when probing SDIO
mtd: consult CONFIG_OFDEVICE in mtd_get_of_node
ARM: at91: sama5d4: enable for DT use
net: macb: match atmel,sama5d4-gem compatible
i2c: at91: extend for SAMA5D4 support
eeprom: at24: add 24mac402/602 support
driver: always ensure probe of RAM registered with mem_platform_driver
common: deep-probe: don't build without CONFIG_OFDEVICE
pinctrl: at91: make deep-probe compatible
ARM: at91: make bootsource code generic to all SAMA5
ARM: at91: SAMA5D4: add Wifx L1 support
ARM: i.MX8M: bootrom-cmd: clean up pointer casting
ARM: i.MX8M: bootrom: access OCRAM directly if running in EL3
regmap: consolidate reg/val format into regmap_format
regmap: support formatted read and write
regmap: port regmap_init_spi
regmap: factor out regmap cdev size calculation
net: dsa: ksz9477: switch to regmap_init_spi
net: dsa: ksz9477: create regmap cdev for switch registers
drivers: base: regmap: introduce REGMAP_I2C
dev: add dev_bus_is_spi/i2c helpers
net: dsa: ksz9477: refactor to prepare i2c support
regmap: i2c: use formatted I/O
net: ksz9477: add I2C support
driver: drop no longer used RW_SIZE/_MASK macros
crypto: caam - sync 64-bit accessors with Linux
crypto: caam - add job ring accessors from Linux
crypto: caam - make command constants unsigned
crypto: caam - implement early PBL init
common: add new CONFIG_HAVE_OPTEE symbol
ARM: i.MX8M: init CAAM when CONFIG_FSL_CAAM_RNG_PBL_INIT
asm-generic: io.h: sync with Linux
mtd: nand: base: implement nand_gpio_waitrdy
mtd: nand: prefix enum nand_ecc_algo constants with NAND_ECC_ALGO_
mtd: nand: rename nand_device::eccreq to Linux' ecc.requirements
mtd: nand: define nand_get_(small|large)_page_ooblayout
mtd: nand: define nand_interface_is_sdr
mtd: nand: provide Linux' struct nand_ecc_ctrl::engine_type
driver: implement dev_request_resource
lib: provide stub Linux "generic" allocator API
state: backend: direct: open backend in read-only mode if possible
of: implement of_device_enable_by_alias
mfd: add atmel-smc driver
memory: add Atmel EBI driver
mtd: nand: atmel: import Linux NAND controller driver
ARM: AT91: sama5d3_xplained: switch to upstream binding
mtd: nand: drop DT support in legacy driver
ARM: AT91: sama5d3: always read memory size from controller
of: platform: call struct device::detect in of_device_create_on_demand
i2c: write debug print when registering any i2c client
i2c: implement detect callback
net: eth: skip opening disabled interfaces when going interactive
ARM: stm32mp: odyssey-som: use upstream device trees
driver: alias of_match_ptr and DRV_OF_COMPAT
gpiolib: implement gpio_direction_input/output
net: dsa: rename dsa_ops to dsa_switch_ops
net: dsa: factor out dsa_port_alloc helper
net: dsa: populate struct dsa_port::index/dev members
net: dsa: always call port_pre_enable before port_enable
net: dsa: add some helpers to ease porting kernel drivers
net: dsa: add struct dsa_switch::priv member for driver use
net: dsa: add Realtek (rtl8365mb/rtl8366rb) switch support
net: dsa: realtek: support enabling only one of the drivers
net: dsa: ksz8873: fix mismatched return value
include: linux/printk: implement pr_*_once macros
fs: tftp: print message when stack can't keep us with TFTP windowsize
include: printk: retire printk_once for pr_debug_once
fs: align write return codes with POSIX
of: describe third arg of of_property_write_bool in kerneldoc
kwboot: add missing header to fix musl build
ARM: <asm/barebox-arm.h>: drop undefined barebox_arm_get_boarddata()
ARM: rockchip: add missing header to <mach/rockchip.h>
sandbox: fix linker warnings with newer ld
of: split part of of_get_stdoutpath into of_find_node_by_chosen
bootsource: use /chosen instead of /aliases/barebox,bootsource-
ARM: stm32mp: much enlarge very early stack size
Documentation: i.MX8M: add EVK barebox installation documentation
Johannes Schneider (1):
ARM: i.MX8M: separate function call for clock_init
Kilian Strasser (1):
pinctrl: rockchip: fix get_value
Lucas Stach (1):
clk: imx8mp: add USB suspend clock
Marcin Niestroj (1):
ARM: rpi: parse memory from vc fdt
Marco Felsch (1):
pbl: set IMAGE_COMPRESSION per default to lz4
Maxim Kochetkov (1):
serial: ns16550: move iomem/ioport init after clock init
Oleksij Rempel (8):
ARM: imx6sx: udoo-neo: port to driver model
ARM: imx6sx: udoo-neo: enable deep probe support
ARM: imx6sx: udoo-neo: fix board compatible
ARM: imx6sx: udoo-neo: configure GPIO pins for board auto detection.
ARM: imx6sx: udoo-neo: add version detection support
ARM: imx6sx: udoo-neo: enable memory size auto detection
ARM: imx6sx: udoo-neo: fix gpt timer configuration
ARM: imx6sx: udoo-neo: add barebox update handler support
Sascha Hauer (30):
dts: update to v6.1
dts: update to v6.2-rc1
Rename device_d::device_node to device_d::of_node
Rename struct device_d to device
Rename struct driver_d to driver
Rename struct fs_device_d to fs_device
Rename struct fs_driver_d to fs_driver
Merge branch 'for-next/struct-rename' into for-next/gpio
Merge branch 'for-next/struct-rename' into for-next/kernelcode-helpers
Merge branch 'for-next/struct-rename' into for-next/at91
dts: update to v6.2-rc3
mci: Add more respone types
mci: handle SDIO cards gracefully
ARM: dts: rpi3: Enable sdhci controller
Merge branch 'for-next/struct-rename' into for-next/misc-struct-rename
ARM: dts: remove duplicate reserved-memory nodes
dts: update to v6.2-rc4
Merge branch 'for-next/kernelcode-helpers' into HEAD
Merge branch 'for-next/gpio' into HEAD
Merge branch 'for-next/at91'
Merge branch 'for-next/caam'
Merge branch 'for-next/dts'
Merge branch 'for-next/imx'
Merge branch 'for-next/jsmn'
Merge branch 'for-next/misc'
Merge branch 'for-next/misc-struct-rename'
Merge branch 'for-next/struct-rename'
gpio: Fix unused variable warning
Revert "sandbox: fix linker warnings with newer ld"
Release v2023.02.0
Ulrich Ölmann (1):
of: partition: moan if adding a partition failed
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
