The overlay adds a SRAM at address 0x1000, but the unit address was
still 0, which is confusing. Change it to sram@1000 instead.
Reported-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
Signed-off-by: Ahmad Fatoum <ahmad@xxxxxx>
---
arch/riscv/boards/riscvemu/overlay-of-sram.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/riscv/boards/riscvemu/overlay-of-sram.dts b/arch/riscv/boards/riscvemu/overlay-of-sram.dts
index 506d45bde9b6..092fb02518b9 100644
--- a/arch/riscv/boards/riscvemu/overlay-of-sram.dts
+++ b/arch/riscv/boards/riscvemu/overlay-of-sram.dts
@@ -9,7 +9,7 @@
__overlay__ {
#address-cells = <2>;
#size-cells = <2>;
- sram@0 {
+ sram@1000 {
compatible = "mtd-ram";
reg = <0 0x1000 0 0x10000>;
#address-cells = <1>;
@@ -49,7 +49,7 @@ fixed-partitions
__overlay__ {
environment {
compatible = "barebox,environment";
- device-path = "/soc/sram@0/partitions/partition@3000";
+ device-path = "/soc/sram@1000/partitions/partition@3000";
};
};
};
--
2.38.1
