Re: [PATCH 3/3] ARM: i.MX8M: define imx8mX_load_bl33 and imx8mX_load_and_start_tfa

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Marco,

On 16.08.22 08:14, Marco Felsch wrote:
> Hi Ahmad,
> 
> On 22-08-15, Ahmad Fatoum wrote:
>> For most users imx8mX_load_and_start_tfa saves a good deal of
>> boilerplate. It's not always sufficient though:
>>
>>   - board code may need a pointer to bl33 to install other firmware
>>     besides barebox proper from there before jumping to bl31 (TF-A).
>>
>>   - board code may want to use a different ARM Trusted Firmware,
>>     e.g. when OP-TEE is to be installed.
>>
>> Thus define two more helper: imx8mX_load_bl33 and
>> imx8mn_load_and_start_tfa, which allows board code to avoid duplicating
>> the chainload logic and focus on doing the board specific stuff only.
>>
>> Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
>> ---
>>  arch/arm/mach-imx/atf.c                | 43 ++++++++++++--------------
>>  arch/arm/mach-imx/include/mach/atf.h   | 12 +++++++
>>  arch/arm/mach-imx/include/mach/xload.h |  4 +++
>>  3 files changed, 36 insertions(+), 23 deletions(-)
>>
>> diff --git a/arch/arm/mach-imx/atf.c b/arch/arm/mach-imx/atf.c
>> index 675e90792a32..5301c0fbe8e5 100644
>> --- a/arch/arm/mach-imx/atf.c
>> +++ b/arch/arm/mach-imx/atf.c
>> @@ -70,13 +70,10 @@ __noreturn void imx8mq_atf_load_bl31(const void *fw, size_t fw_size)
>>  	imx8m_atf_start_bl31(fw, fw_size, (void *)MX8MQ_ATF_BL31_BASE_ADDR);
>>  }
>>  
>> -__noreturn void imx8mm_load_and_start_image_via_tfa(void)
>> +void imx8mm_load_bl33(void *bl33)
>>  {
>> -	size_t bl31_size;
>> -	const u8 *bl31;
>>  	enum bootsource src;
>>  	int instance;
>> -	void *bl33 = (void *)MX8M_ATF_BL33_BASE_ADDR;
>>  
>>  	imx8mm_get_boot_source(&src, &instance);
>>  	switch (src) {
>> @@ -122,16 +119,16 @@ __noreturn void imx8mm_load_and_start_image_via_tfa(void)
>>  	 * the same code in DRAM.
>>  	 */
>>  	memcpy(bl33, __image_start, barebox_pbl_size);
>> +}
>>  
>> -	get_builtin_firmware(imx8mm_bl31_bin, &bl31, &bl31_size);
>> -
>> -	imx8mm_atf_load_bl31(bl31, bl31_size);
>> +__noreturn void imx8mm_load_and_start_image_via_tfa(void)
>> +{
>> +	imx8mm_load_bl33((void *)MX8M_ATF_BL33_BASE_ADDR);
>               ^
> This is already defined by your macro "imx8mm_load_and_start_tfa".

Ouch, thanks for spotting. Just fixed in v2.

> 
> Regards,
>   Marco
> 
>> +	imx8mm_load_and_start_tfa(imx8mm_bl31_bin);
>>  }
>>  
>> -__noreturn void imx8mp_load_and_start_image_via_tfa(void)
>> +void imx8mp_load_bl33(void *bl33)
>>  {
>> -	size_t bl31_size;
>> -	const u8 *bl31;
>>  	enum bootsource src;
>>  	int instance;
>>  
>> @@ -157,18 +154,17 @@ __noreturn void imx8mp_load_and_start_image_via_tfa(void)
>>  	 * for the piggy data, so we need to ensure that we are running
>>  	 * the same code in DRAM.
>>  	 */
>> -	memcpy((void *)MX8M_ATF_BL33_BASE_ADDR,
>> -	       __image_start, barebox_pbl_size);
>> -
>> -	get_builtin_firmware(imx8mp_bl31_bin, &bl31, &bl31_size);
>> +	memcpy(bl33, __image_start, barebox_pbl_size);
>> +}
>>  
>> -	imx8mp_atf_load_bl31(bl31, bl31_size);
>> +void imx8mp_load_and_start_image_via_tfa(void)
>> +{
>> +	imx8mp_load_bl33((void *)MX8M_ATF_BL33_BASE_ADDR);
>> +	imx8mp_load_and_start_tfa(imx8mp_bl31_bin);
>>  }
>>  
>> -__noreturn void imx8mn_load_and_start_image_via_tfa(void)
>> +void imx8mn_load_bl33(void *bl33)
>>  {
>> -	size_t bl31_size;
>> -	const u8 *bl31;
>>  	enum bootsource src;
>>  	int instance;
>>  
>> @@ -194,10 +190,11 @@ __noreturn void imx8mn_load_and_start_image_via_tfa(void)
>>  	 * for the piggy data, so we need to ensure that we are running
>>  	 * the same code in DRAM.
>>  	 */
>> -	memcpy((void *)MX8M_ATF_BL33_BASE_ADDR,
>> -	       __image_start, barebox_pbl_size);
>> -
>> -	get_builtin_firmware(imx8mn_bl31_bin, &bl31, &bl31_size);
>> +	memcpy(bl33, __image_start, barebox_pbl_size);
>> +}
>>  
>> -	imx8mn_atf_load_bl31(bl31, bl31_size);
>> +void imx8mn_load_and_start_image_via_tfa(void)
>> +{
>> +	imx8mn_load_bl33((void *)MX8M_ATF_BL33_BASE_ADDR);
>> +	imx8mn_load_and_start_tfa(imx8mn_bl31_bin);
>>  }
>> diff --git a/arch/arm/mach-imx/include/mach/atf.h b/arch/arm/mach-imx/include/mach/atf.h
>> index ca54bb5fbf82..b3c4ecb92576 100644
>> --- a/arch/arm/mach-imx/include/mach/atf.h
>> +++ b/arch/arm/mach-imx/include/mach/atf.h
>> @@ -23,4 +23,16 @@ void __noreturn imx8mn_atf_load_bl31(const void *fw, size_t fw_size);
>>  void __noreturn imx8mp_atf_load_bl31(const void *fw, size_t fw_size);
>>  void __noreturn imx8mq_atf_load_bl31(const void *fw, size_t fw_size);
>>  
>> +#define imx8m_load_and_start_tfa(soc,fw_name) do { \
>> +	size_t __bl31_size; \
>> +	const u8 *__bl31; \
>> +	soc##_load_bl33((void *)MX8M_ATF_BL33_BASE_ADDR); \
>> +	get_builtin_firmware(fw_name, &__bl31, &__bl31_size); \
>> +	soc##_atf_load_bl31(__bl31, __bl31_size); \
>> +} while (0)
>> +
>> +#define imx8mm_load_and_start_tfa(fw_name) imx8m_load_and_start_tfa(imx8mm, fw_name)
>> +#define imx8mn_load_and_start_tfa(fw_name) imx8m_load_and_start_tfa(imx8mn, fw_name)
>> +#define imx8mp_load_and_start_tfa(fw_name) imx8m_load_and_start_tfa(imx8mp, fw_name)
>> +
>>  #endif
>> diff --git a/arch/arm/mach-imx/include/mach/xload.h b/arch/arm/mach-imx/include/mach/xload.h
>> index fe43d2502632..82bf663c4266 100644
>> --- a/arch/arm/mach-imx/include/mach/xload.h
>> +++ b/arch/arm/mach-imx/include/mach/xload.h
>> @@ -16,6 +16,10 @@ int imx8m_esdhc_load_image(int instance, bool start);
>>  int imx8mn_esdhc_load_image(int instance, bool start);
>>  int imx8mp_esdhc_load_image(int instance, bool start);
>>  
>> +void imx8mm_load_bl33(void *bl33);
>> +void imx8mn_load_bl33(void *bl33);
>> +void imx8mp_load_bl33(void *bl33);
>> +
>>  void __noreturn imx8mm_load_and_start_image_via_tfa(void);
>>  void __noreturn imx8mn_load_and_start_image_via_tfa(void);
>>  void __noreturn imx8mp_load_and_start_image_via_tfa(void);
>> -- 
>> 2.30.2
>>
>>
>>
> 


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |




[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux