For most users imx8mX_load_and_start_tfa saves a good deal of
boilerplate. It's not always sufficient though:
- board code may need a pointer to bl33 to install other firmware
besides barebox proper from there before jumping to bl31 (TF-A).
- board code may want to use a different ARM Trusted Firmware,
e.g. when OP-TEE is to be installed.
Thus define two more helper: imx8mX_load_bl33 and
imx8mn_load_and_start_tfa, which allows board code to avoid duplicating
the chainload logic and focus on doing the board specific stuff only.
Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
---
arch/arm/mach-imx/atf.c | 43 ++++++++++++--------------
arch/arm/mach-imx/include/mach/atf.h | 12 +++++++
arch/arm/mach-imx/include/mach/xload.h | 4 +++
3 files changed, 36 insertions(+), 23 deletions(-)
diff --git a/arch/arm/mach-imx/atf.c b/arch/arm/mach-imx/atf.c
index 675e90792a32..5301c0fbe8e5 100644
--- a/arch/arm/mach-imx/atf.c
+++ b/arch/arm/mach-imx/atf.c
@@ -70,13 +70,10 @@ __noreturn void imx8mq_atf_load_bl31(const void *fw, size_t fw_size)
imx8m_atf_start_bl31(fw, fw_size, (void *)MX8MQ_ATF_BL31_BASE_ADDR);
}
-__noreturn void imx8mm_load_and_start_image_via_tfa(void)
+void imx8mm_load_bl33(void *bl33)
{
- size_t bl31_size;
- const u8 *bl31;
enum bootsource src;
int instance;
- void *bl33 = (void *)MX8M_ATF_BL33_BASE_ADDR;
imx8mm_get_boot_source(&src, &instance);
switch (src) {
@@ -122,16 +119,16 @@ __noreturn void imx8mm_load_and_start_image_via_tfa(void)
* the same code in DRAM.
*/
memcpy(bl33, __image_start, barebox_pbl_size);
+}
- get_builtin_firmware(imx8mm_bl31_bin, &bl31, &bl31_size);
-
- imx8mm_atf_load_bl31(bl31, bl31_size);
+__noreturn void imx8mm_load_and_start_image_via_tfa(void)
+{
+ imx8mm_load_bl33((void *)MX8M_ATF_BL33_BASE_ADDR);
+ imx8mm_load_and_start_tfa(imx8mm_bl31_bin);
}
-__noreturn void imx8mp_load_and_start_image_via_tfa(void)
+void imx8mp_load_bl33(void *bl33)
{
- size_t bl31_size;
- const u8 *bl31;
enum bootsource src;
int instance;
@@ -157,18 +154,17 @@ __noreturn void imx8mp_load_and_start_image_via_tfa(void)
* for the piggy data, so we need to ensure that we are running
* the same code in DRAM.
*/
- memcpy((void *)MX8M_ATF_BL33_BASE_ADDR,
- __image_start, barebox_pbl_size);
-
- get_builtin_firmware(imx8mp_bl31_bin, &bl31, &bl31_size);
+ memcpy(bl33, __image_start, barebox_pbl_size);
+}
- imx8mp_atf_load_bl31(bl31, bl31_size);
+void imx8mp_load_and_start_image_via_tfa(void)
+{
+ imx8mp_load_bl33((void *)MX8M_ATF_BL33_BASE_ADDR);
+ imx8mp_load_and_start_tfa(imx8mp_bl31_bin);
}
-__noreturn void imx8mn_load_and_start_image_via_tfa(void)
+void imx8mn_load_bl33(void *bl33)
{
- size_t bl31_size;
- const u8 *bl31;
enum bootsource src;
int instance;
@@ -194,10 +190,11 @@ __noreturn void imx8mn_load_and_start_image_via_tfa(void)
* for the piggy data, so we need to ensure that we are running
* the same code in DRAM.
*/
- memcpy((void *)MX8M_ATF_BL33_BASE_ADDR,
- __image_start, barebox_pbl_size);
-
- get_builtin_firmware(imx8mn_bl31_bin, &bl31, &bl31_size);
+ memcpy(bl33, __image_start, barebox_pbl_size);
+}
- imx8mn_atf_load_bl31(bl31, bl31_size);
+void imx8mn_load_and_start_image_via_tfa(void)
+{
+ imx8mn_load_bl33((void *)MX8M_ATF_BL33_BASE_ADDR);
+ imx8mn_load_and_start_tfa(imx8mn_bl31_bin);
}
diff --git a/arch/arm/mach-imx/include/mach/atf.h b/arch/arm/mach-imx/include/mach/atf.h
index ca54bb5fbf82..b3c4ecb92576 100644
--- a/arch/arm/mach-imx/include/mach/atf.h
+++ b/arch/arm/mach-imx/include/mach/atf.h
@@ -23,4 +23,16 @@ void __noreturn imx8mn_atf_load_bl31(const void *fw, size_t fw_size);
void __noreturn imx8mp_atf_load_bl31(const void *fw, size_t fw_size);
void __noreturn imx8mq_atf_load_bl31(const void *fw, size_t fw_size);
+#define imx8m_load_and_start_tfa(soc,fw_name) do { \
+ size_t __bl31_size; \
+ const u8 *__bl31; \
+ soc##_load_bl33((void *)MX8M_ATF_BL33_BASE_ADDR); \
+ get_builtin_firmware(fw_name, &__bl31, &__bl31_size); \
+ soc##_atf_load_bl31(__bl31, __bl31_size); \
+} while (0)
+
+#define imx8mm_load_and_start_tfa(fw_name) imx8m_load_and_start_tfa(imx8mm, fw_name)
+#define imx8mn_load_and_start_tfa(fw_name) imx8m_load_and_start_tfa(imx8mn, fw_name)
+#define imx8mp_load_and_start_tfa(fw_name) imx8m_load_and_start_tfa(imx8mp, fw_name)
+
#endif
diff --git a/arch/arm/mach-imx/include/mach/xload.h b/arch/arm/mach-imx/include/mach/xload.h
index fe43d2502632..82bf663c4266 100644
--- a/arch/arm/mach-imx/include/mach/xload.h
+++ b/arch/arm/mach-imx/include/mach/xload.h
@@ -16,6 +16,10 @@ int imx8m_esdhc_load_image(int instance, bool start);
int imx8mn_esdhc_load_image(int instance, bool start);
int imx8mp_esdhc_load_image(int instance, bool start);
+void imx8mm_load_bl33(void *bl33);
+void imx8mn_load_bl33(void *bl33);
+void imx8mp_load_bl33(void *bl33);
+
void __noreturn imx8mm_load_and_start_image_via_tfa(void);
void __noreturn imx8mn_load_and_start_image_via_tfa(void);
void __noreturn imx8mp_load_and_start_image_via_tfa(void);
--
2.30.2
