On Tue, Apr 19, 2022 at 02:46:59PM +0200, Andrej Picej wrote: > Since commit a5a4c1d5a3 ("dts: update to v5.13-rc1"), which synced > kernel dts, USB-OTG port on phyFLEX board was set to work only in > peripheral mode. This has to do with phyFLEX baseboard hardware bug, > which prevents correct USB OTG ID pin detection in kernel code. > > Unlike linux kernel, barebox doesn't support OTG auto-detection mode via > ID pin. In barebox, user has to select desired USB mode of operation by > setting 'otg.mode' variable. Thus set the 'dr_mode' property to "otg" to > be able to later select USB OTG operating mode at runtime (either host > or peripheral). > > Signed-off-by: Andrej Picej <andrej.picej@xxxxxxxxx> > --- > - rather than deleting the dr_mode property, set the property to "otg" > to explicitly set the mode to OTG > --- > arch/arm/dts/imx6qdl-phytec-pbab01.dtsi | 4 ++++ > 1 file changed, 4 insertions(+) Applied, thanks Sascha > > diff --git a/arch/arm/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/dts/imx6qdl-phytec-pbab01.dtsi > index 991c7e4fab..88db962535 100644 > --- a/arch/arm/dts/imx6qdl-phytec-pbab01.dtsi > +++ b/arch/arm/dts/imx6qdl-phytec-pbab01.dtsi > @@ -15,6 +15,10 @@ > status = "okay"; > }; > > +&usbotg { > + dr_mode = "otg"; > +}; > + > #ifdef USE_STATE_EXAMPLE > #include "state-example.dtsi" > #endif > -- > 2.25.1 > > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox