The "rpi" host name is not practical if you need to work with different
variants of RPi at same time. Usually, removing barebox_set_hostname()
would let barebox generate it automatically. But in this case, the name
would look less informative. For example "2-model-b".
So, make board code generate something usable, for example
"rpi-2-model-b"
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
arch/arm/boards/raspberry-pi/rpi-common.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c b/arch/arm/boards/raspberry-pi/rpi-common.c
index e68857ded9..6e62d19643 100644
--- a/arch/arm/boards/raspberry-pi/rpi-common.c
+++ b/arch/arm/boards/raspberry-pi/rpi-common.c
@@ -378,6 +378,8 @@ static int rpi_devices_probe(struct device_d *dev)
const struct rpi_machine_data *dcfg;
struct regulator *reg;
struct rpi_priv *priv;
+ const char *name, *ptr;
+ char *hostname;
int ret;
priv = xzalloc(sizeof(*priv));
@@ -391,7 +393,12 @@ static int rpi_devices_probe(struct device_d *dev)
if (IS_ERR(dcfg))
goto free_priv;
- barebox_set_hostname("rpi");
+ /* construct short recognizable host name */
+ name = of_device_get_match_compatible(priv->dev);
+ ptr = strchr(name, ',');
+ hostname = basprintf("rpi-%s", ptr ? ptr + 1 : name);
+ barebox_set_hostname(hostname);
+ free(hostname);
rpi_add_led();
bcm2835_register_fb();
--
2.30.2
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
