Hi, Le mar. 26 janv. 2021 à 18:25, Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> a écrit : > > Hi, > > On 26.01.21 18:06, DEMIRDJIAN, Antoine wrote: > > Dear all, > > > > I'm working on a custom board based on an i.MX6 Dual Lite. > > I've set a MAC address on OCOTP, and I can see it : > > > > barebox@Main Board:/ devinfo ocotp0 > > Parameters: > > mac_addr: 70:82:0e:12:73:6f (type: MAC) > > mac_addr0: 70:82:0e:12:73:6f (type: MAC) > > permanent_write_enable: 0 (type: bool) > > sense_enable: 0 (type: bool) > > > > The issue is that I can't get it from eth0 : > > > > barebox@Chrysalis Main Board:/ devinfo eth0 > > Parameters: > > ethaddr: 00:00:00:00:00:00 (type: MAC) > > gateway: 192.1.1.100 (type: ipv4) > > ipaddr: 0.0.0.0 (type: ipv4) > > linux.bootargs: ip=0.0.0.0:192.1.1.46:192.1.1.100:255.255.255.0::: > > (type: string) > > linux.devname: (type: string) > > mode: static (type: enum) (values: "dhcp", "static", "disabled") > > netmask: 255.255.255.0 (type: ipv4) > > serverip: 192.1.1.46 (type: string) > > > > My operating system's driver does not see it neither ... > > > > Am I missing something? > > Yes: https://barebox.org/doc/latest/devicetree/bindings/misc/fsl,imx-ocotp.html > > Check the other i.MX board in arch/arm/dts for an example. Many thanks ! Sorry for the noise... Best regards, Antoine _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox