Dear all, I'm working on a custom board based on an i.MX6 Dual Lite. I've set a MAC address on OCOTP, and I can see it : barebox@Main Board:/ devinfo ocotp0 Parameters: mac_addr: 70:82:0e:12:73:6f (type: MAC) mac_addr0: 70:82:0e:12:73:6f (type: MAC) permanent_write_enable: 0 (type: bool) sense_enable: 0 (type: bool) The issue is that I can't get it from eth0 : barebox@Chrysalis Main Board:/ devinfo eth0 Parameters: ethaddr: 00:00:00:00:00:00 (type: MAC) gateway: 192.1.1.100 (type: ipv4) ipaddr: 0.0.0.0 (type: ipv4) linux.bootargs: ip=0.0.0.0:192.1.1.46:192.1.1.100:255.255.255.0::: (type: string) linux.devname: (type: string) mode: static (type: enum) (values: "dhcp", "static", "disabled") netmask: 255.255.255.0 (type: ipv4) serverip: 192.1.1.46 (type: string) My operating system's driver does not see it neither ... Am I missing something? Best Regards, Antoine _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
