The device tree clock lookups use the position in the clks array,
hence they must match. fec_sleep is a barebox specific clock and
is in between other clocks. Put the clock at the end of the array.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
drivers/clk/mxs/clk-imx28.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
index aedd8d4a7c..241b26c9a2 100644
--- a/drivers/clk/mxs/clk-imx28.c
+++ b/drivers/clk/mxs/clk-imx28.c
@@ -56,8 +56,8 @@ enum imx28_clk {
emi_xtal, lcdif_div, etm_div, ptp, saif0_div, saif1_div,
clk32k_div, rtc, lradc, spdif_div, clk32k, pwm, uart, ssp0,
ssp1, ssp2, ssp3, gpmi, spdif, emi, saif0, saif1, lcdif, etm,
- fec_sleep, fec, can0, can1, usb0, usb1, usb0_phy, usb1_phy, enet_out,
- lcdif_comp, clk_max
+ fec, can0, can1, usb0, usb1, usb0_phy, usb1_phy, enet_out,
+ lcdif_comp, fec_sleep, clk_max
};
static struct clk *clks[clk_max];
--
2.26.2
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
