Re: [PATCH] firmware-zynqmp: port from linux

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Thomas,

On Mon, Feb 11, 2019 at 02:10:40PM +0000, Thomas Hämmerle wrote:
> From: Thomas Haemmerle <thomas.haemmerle@xxxxxxxxxxxxxx>
> 
> Port Xilinx Zynq MPSoC Firmware layer driver from linux.
> 
> Signed-off-by: Thomas Haemmerle <thomas.haemmerle@xxxxxxxxxxxxxx>
> ---
>  arch/arm/Kconfig                                   |   1 +
>  arch/arm/mach-zynqmp/Makefile                      |   2 +-
>  arch/arm/mach-zynqmp/firmware-zynqmp.c             | 601 +++++++++++++++++++++
>  .../arm/mach-zynqmp/include/mach/firmware-zynqmp.h |  66 +++
>  4 files changed, 669 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/mach-zynqmp/firmware-zynqmp.c
>  create mode 100644 arch/arm/mach-zynqmp/include/mach/firmware-zynqmp.h
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index c1f385b..fdbe5b7 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -250,6 +250,7 @@ config ARCH_ZYNQMP
>  	select CPU_V8
>  	select HAS_DEBUG_LL
>  	select HAVE_PBL_MULTI_IMAGES
> +	select ARM_SMCCC
>  	select COMMON_CLK
>  	select COMMON_CLK_OF_PROVIDER
>  	select CLKDEV_LOOKUP
> diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
> index c601374..021efc9 100644
> --- a/arch/arm/mach-zynqmp/Makefile
> +++ b/arch/arm/mach-zynqmp/Makefile
> @@ -1,2 +1,2 @@
>  # SPDX-License-Identifier: GPL-2.0-or-later
> -obj- := __dummy__.o
> +obj-y += firmware-zynqmp.o
> diff --git a/arch/arm/mach-zynqmp/firmware-zynqmp.c b/arch/arm/mach-zynqmp/firmware-zynqmp.c


Maybe drivers/firmware/ would be a more appropriate directory to put
this driver in.

> +static int zynqmp_firmware_probe(struct device_d *dev)
> +{
> +	int ret;
> +
> +	ret = get_set_conduit_method(dev->device_node);
> +	if (ret)
> +		goto out;
> +
> +	zynqmp_pm_get_api_version(&pm_api_version);
> +	if (pm_api_version < ZYNQMP_PM_VERSION) {
> +		dev_err(dev, "Platform Management API version error."
> +				"Expected: v%d.%d - Found: v%d.%d\n",
> +				ZYNQMP_PM_VERSION_MAJOR,
> +				ZYNQMP_PM_VERSION_MINOR,
> +				pm_api_version >> 16, pm_api_version & 0xFFFF);
> +		ret = -1;
> +		goto out;

-1 is -EPERM which is not a meaningful error code here. Please pick
something appropriate from errno.h.

Otherwise looks good. This looks like clock support. Are you planning to
create a clk driver aswell?

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox




[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux