[PATCH v5 9/9] ARM: rpi: use defines for uart bases

[Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>]

Previously the clkdev_add_phybase was called on magic register values,
add defines which clarify the device for which the phybase clkdev is created.

Signed-off-by: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
---
 arch/arm/boards/raspberry-pi/rpi-common.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c b/arch/arm/boards/raspberry-pi/rpi-common.c
index e29177d..b8a41b2 100644
--- a/arch/arm/boards/raspberry-pi/rpi-common.c
+++ b/arch/arm/boards/raspberry-pi/rpi-common.c
@@ -297,6 +297,10 @@ static int rpi_clock_init(void)
 }
 postconsole_initcall(rpi_clock_init);
 
+#define BCM2835_PL011_BASE 0x20201000
+#define BCM2836_PL011_BASE 0x3f201000
+#define BCM2836_MINIUART_BASE 0x3f215040
+
 static int rpi_console_clock_init(void)
 {
 	struct clk *clk;
@@ -306,15 +310,15 @@ static int rpi_console_clock_init(void)
 
 	clk = clk_fixed("uart0-pl0110", 3 * 1000 * 1000);
 	clk_register_clkdev(clk, NULL, "uart0-pl0110");
-	clkdev_add_physbase(clk, 0x20201000, NULL);
-	clkdev_add_physbase(clk, 0x3f201000, NULL);
+	clkdev_add_physbase(clk, BCM2835_PL011_BASE, NULL);
+	clkdev_add_physbase(clk, BCM2836_PL011_BASE, NULL);
 
 	clk = rpi_register_firmware_clock(BCM2835_MBOX_CLOCK_ID_CORE,
 					  "uart1-8250");
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 
-	clkdev_add_physbase(clk, 0x3f215040, NULL);
+	clkdev_add_physbase(clk, BCM2836_MINIUART_BASE, NULL);
 
 	clk = clk_fixed("bcm2835-cs", 1 * 1000 * 1000);
 	clk_register_clkdev(clk, NULL, "bcm2835-cs");
-- 
git-series 0.9.1

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox