Hi All,
I just released v2018.12.0.
Most notable this time is that we finally have Raspberry Pi 3 support.
It took a while to get the patches into shape, but now they are there.
Other than that we have several AT91 patches which add a SoC specific
prefix to the several SoC specific defines. This will allow to include
multiple SoC headers and thus will make the way free for building multi
SoC AT91 images.
See below for a detailed list of changes for this release.
Have Fun!
Sascha
----------------------------------------------------------------
Ahmad Fatoum (1):
ARM: at91: Add initial support for the EVB-KSZ9477 eval board
Andrey Smirnov (58):
rave-sp: backlight: Specify parent device correctly
tlsf_malloc: dummy_malloc: Share code for calloc()
dummy_malloc: Make use of PTR_ALIGN
dummy_malloc: Check if sbrk() fails
tlsf_malloc: Set errno to ENOMEM on failure
libfile: Error out if out of memory in read_file_2()
miitool: Fix inconsistent spacing
ARM: Do not expose ARMv8 functions on ARMv7
clocksource: Add ARM global timer support
VFxxx: Select CLOCKSOURCE_ARM_GLOBAL_TIMER
i.MX: Move GPT driver to drivers/clocksource
clocksource: Introduce ARCH_HAS_IMX_GPT
of: Demote "Bad cell count for" to debug
aiodev: Don't try to use DT node name as aiodev->name
aiodev: imx_thermal: Give aiodev a more descriptive name
aiodev: qoriq_thermal: Give aiodev a more descriptive name
drivers: Introduce dev_set_name()
base: Don't use shared buffer for results of dev_id()
drivers: base: Convert device_d name to be dynamically allocated
linux: string: Port kbasename()
of: Port latest of_device_make_bus_id() implementation
mdio_bus: Fix documentation for mdio_bus_match()
include: linux: phy: Add missing PHY_INTERFACE_* constants
include: linux: ethtool: Add missing *_UNKNOWN constants
net: phy: Check phy_mask in get_phy_device()
mdio_bus: Allow for non PHY-devices on MDIO buses
net: phy: Add basic driver for MV88E6XXX switches from Marvell
net: phy: mv88e6xxx: Port EEPROM support code
net: phy: mv88e6xxx: Add support for MAC ports
partitions: efi: Constify force_gpt
ARM: rdu2: Add switch EEPROM alias
ARM: rdu1: Add switch EEPROM alias
ARM: vf610-zii-dev-rev-c: Add switch EEPROM alias
ARM: vf610-zii-cfu1: Add switch EEPROM alias
ARM: vf610-zii-ssmb-spu3: Add switch EEPROM alias
ARM: imx7d-zii-rpu2: Add switch EEPROM alias
ARM: rdu2: Add switch EEPROM alias
ARM: rdu1: Add switch EEPROM alias
ARM: vf610-zii-dev-rev-c: Add switch EEPROM alias
ARM: vf610-zii-cfu1: Add switch EEPROM alias
ARM: vf610-zii-ssmb-spu3: Add switch EEPROM alias
ARM: imx7d-zii-rpu2: Add switch EEPROM alias
gpio: VF610: Propagate error code of gpiochip_add() up
linux/ctype.h: Port _tolower()
lib: Port kstrtox.c from Linux kernel
commands: gpio: Move argument parsing into a shared function
commands: gpio: Use kstrtoint() instead of simple_strtoul()
gpiolib: Introduce gpio_find_by_label()
commands: gpio: Allow GPIOs to be specified by label
VF610: zii-vf610-dev: Drop switch reset GPIO configuration
drivers: base: Simplify generic_memmap_ro()
drivers: base: Drop dev_get_mem_region_by_name()
drivers: base: Simplify dev_request_mem_region_err_null()
ARM: rdu2: Replace board code with gpio-hog nodes
lib: Port CRC8 implementation from Linux kernel
nvmem: Port Linux driver for Microwire 93XX46 EEPROM chips
ARM: rdu1: Add an alias for Microwire EEPROM
ARM: rdu1: Implement RDU1 config loading
Clément Leger (2):
phy: call adjust_link in attach if using fixed-link
Display barebox instead of kernel in build message
Enrico Joerns (1):
ARM: rpi: add revision IDs for Pi 3 Model B and Pi Zero
Enrico Jorns (1):
nand: denali: remove undefined GFP_DMA flag
Ian Abbott (1):
net: designware: look for a child device node for MDIO bus
Ladislav Michl (7):
blspec: do not depend on BLOCK
mtd: atmel_nand: replace printk with dev_info
mtd: nand: add accessors, macros for in-memory BBT
mtd: nand: don't break long print messages
usb: gadget: set maxpacket_limit
Documentation: USB gadget: document usbgadget.fastboot_bbu variable
usbgadget: autostart: add DFU support
Lucas Stach (20):
ARM: pass architecture flag for SMCC also to PBL compilation unit
ARM: import opcode helpers from Linux kernel
ARM: safely switch from HYP to SVC mode if required
ARM: allow secure monitor code to be built without PSCI
ARM: rdu2: config PMIC SW1AB and SW1C rails to 1.375
ARM: rdu2: configure the USB port as OTG
ARM: rdu2: program e1000 iNVM
ARM: rdu2: fix warnings in Barebox internal DT
ARM: add file for HYP mode related setup
ARM: don't try to install secure monitor when entered in HYP mode
ARM: default to starting kernel in HYP mode when entered in HYP
ARM: install HYP vectors at PBL and Barebox entry
ARM: rpi: add raspberry pi 3 support
ARM: rpi: autosize malloc area
commands: mem: truncate mem device size to fit the loff_t file size
net: only use ethaddrs registered with device node on that device
scripts: imx-image: fix first instruction in i.MX8MQ header
ARM: nxp-imx8mq-evk: remove SDRAM reservation for ATF
ARM: nxp-imx8mq-evk: add barebox and env partitions
serdev: select POLLER
Marcin Niestroj (2):
net: dhcp: fix option 54
ARM: i.MX: Add liteboard support
Marco Felsch (6):
i2c: introduce device_i2c_driver() macro
rtc: ds1307: Add ds3231 to driver's ID list
gpiolib: fix of_gpio_hog error handling
gpiolib: fix of_hog_gpio gpio label assignment
gpio: tree-wide don't probe devices during core_initcall
pinctrl: tree-wide probe devices during core_initcall
Matthias Schiffer (2):
clk: fix NULL deref without OF node in debug message
FIT: support hash-1/signature-1 nodes in signature check
Oleksij Rempel (2):
ratp: fix compile warnings
ratp: fix compile warnings
Rouven Czerwinski (1):
multiple/raspberry-pi: fix clkdevs for raspberry pi
Sascha Hauer (83):
ARM: Fix missing prototype warning
mtd: nand: mxs: make locally used functions static
video: imx-ipu-v3: Make locally used function static
ARM: mmu: rename dma_alloc
of: fix reproducible node name for legacy vs. new partition binding
bootchooser: put bootchooser after creating a boot entry
bootchooser: Add reference counting
dma: Add missing re-inclusion protector
ARM: mmu: include dma.h
fs: Make locally used functions static
ARM: cache: include mmu.h
ARM: boards: GuF Vincell: Make locally used function static
ARM: boards: karo-tx6x: Make locally used function static
ARM: boards: kindle mx50: Make locally used function static
ARM: boards: kontron-samx6i: Add include file to provide prototype
ARM: boards: phytec-som-imx6: Make locally used function static
ARM: legacy Linux support: Make locally used functions static
drivers: clk: imx5: Make locally used functions static
usb: ulpi: Make locally used functions static
ARM: unwind: Provide prototypes for exported functions
ARM: unwind: Make locally used function static
ARM: i.MX: Add missing include
nvmem: i.MX ocotp: Make locally used functions static
usb: gadget: fsl_udc: Drop using global variable
usb: host: ehci: rename ehci_priv to ehci_host
usb: Add usb_unregister_host()
USB: gadget: prevent unnecessary warning message
usb: host: ehci: add ehci_unregister()
usb: host: ehci: do not use dev->priv
usb: host: ehci-atmel: unregister host on device remove
usb: imx: unregister ehci controller on device removal
usb: gadget: fsl_udc: pass controller instance to unregister
net: macb: no need for coherent memory for receive buffer
net: macb: remove unused variable
net: macb: simplify private data allocation
net: macb: add remove callback
pinctrl: at91: Do not print registration messages
net: macb: Add compatible for atmel,sama5d3-gem
ARM: at91: remove unused AT_DMA_ID_ defines
ARM: at91: remove unused CONSISTENT_DMA_SIZE defines
ARM: at91rm9200ek: Use SoC specific defines
ARM: at91sam926x: Add header for at91sam926x common base addresses
ARM: at91: remove unused defines
ARM: at91: drop AT91_NB_USART
ARM: at91: remove AT91_SDRAM_BASE
ARM: at91: consolidate phy reset functions
ARM: at91: remove common matrix header file
ARM: at91: Add SoC namespace to matrix defines
ARM: at91: Use SoC specific base addresses where appropriate
ARM: at91rm9200: Add SoC namespace to memory controller defines
ARM: at91: remove unused header file
ARM: at91rm9200 timer: remove unused include
ARM: at91rm9200 timer: Make system timer defines SoC specific
ARM: at91: remove mach/io.h
ARM: at91sam926x use writel rather than pmc accessor function
ARM: at91rm9200ek: use plain readl/writel for pmc accesses
ARM: at91: drop at91_pmc_write()/at91_pmc_read()
ARM: at91: make at91sam926x_board_init board specific
ARM: at91: separate restart handler registration into SoC specific code
ARM: at91: remove unused defines
dts: update to v4.19-rc8
dts: update to v4.20-rc1
Merge branch 'for-next/at91'
Merge branch 'for-next/driver'
Merge branch 'for-next/dts'
Merge branch 'for-next/gpio'
Merge branch 'for-next/imx'
Merge branch 'for-next/malloc'
Merge branch 'for-next/misc'
Merge branch 'for-next/missing-prototypes'
Merge branch 'for-next/mtd'
Merge branch 'for-next/net'
Merge branch 'for-next/net-switch-mv88e6xxx'
Merge branch 'for-next/rpi3'
Merge branch 'for-next/socfpga'
Merge branch 'for-next/state'
Merge branch 'for-next/usb'
bootm: Print which file cannot be opened
ARM: i.MX: When SRSR shows wdog then lookup reset source in wdog
commands: mem: Fix compiler warning
net: cpsw: support "phy-handle" and deprecate "phy_id"
mount command: Fix "mount /dev/<devname>"
Release v2018.12.0
Steffen Trumtrar (5):
ARM: socfpga: add lowlevel header with common code
ARM: socfpga: sockit: convert to lowlevel helper
ARM: socfgpa: de0-nano-soc: convert to lowlevel helpers
ARM: socfpga: socdk: convert to lowlevel helpers
ARM: socfpga: socrates: convert to lowlevel helpers
Teresa Remmet (1):
arm: mach-omap: xload: Enable network interface
Ulrich Ölmann (7):
state: backend_bucket_circular: fix memory leak
common: state: fix typo
state: backend_bucket_circular: remove unused variables
common: state: use of_property_write_string() where appropriate
state: fix documentation of state_new_from_node()
of: base: fix typo
state: fix indentation
perachet7@xxxxxxxxx (1):
ARM: clk: rk3188: don't set same clk rate twice
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
