Hey all, the bootmode detection I figured out, but the using DFU to directly flash barebox bricks my system; usbgadget -D /dev/nand0.barebox(barebox)s That doesn't work. Is there a way to update barebox via DFU? If not directly is it possible to trigger a script after DFU uploaded a file, so I can call barebox_update ? Or what would be the "barebox" way to do it ? TIA, Erwin On Fri, 2018-11-30 at 14:49 +0100, Erwin Rol wrote: > Hallo all, > > I have my barebox running on a iMx6 (phyBOARD-Segin + phyCORE-i.MX 6UL > Modul). > > Loading via USB works fine, and via DFU I can upload a barebox image > and use barebox_update to flash barebox in NAND. > > Is it possible to have DFU correctly flash barebox, without first > upload a image to /tmp/barebox and than use barebox_update ? > > And a second question is it possible to detect if barebox was booted > from NAND or from USB via imx-loader ? I woud like to use that to start > the system normal when it boots from NAND but go in DFU update mode > when it was started via imx-usb-loader. > > As always hints and tips are very welcome, > > Erwin > > > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
