On Mon, Oct 15, 2018 at 05:38:35PM -0700, Andrey Smirnov wrote: > Make sure that there's a space between device name and it's status > string regardless if if device is using "id" field or not. > > Before: > > barebox@ZII RDU2 Board:/ miitool > mdio0-phy00: mdio:no link > mdio1-phy15: 2188000.ethernet@2188000:10 Mbit, half duplex, no link > mdio1-phy16: 2188000.ethernet@2188000:10 Mbit, half duplex, no link > mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0:no link > mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0:no link > mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0:negotiated 100baseTx-FD, link ok > mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0:no link > mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0:no link > mdio3-phy01: eth1: negotiated 1000baseT-FD flow-control, link ok > > After: > > barebox@ZII RDU2 Board:/ miitool > mdio0-phy00: mdio: no link > mdio1-phy15: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link > mdio1-phy16: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link > mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0: no link > mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0: no link > mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0: no link > mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0: no link > mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0: no link > mdio3-phy01: eth1: no link the patch seems to have some impact on the link status of mdio2-phy02 and mdio3-phy01. I wonder where this comes from :-) Other than that: Acked-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> because it makes the output better readable. Best regards Uwe -- Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | http://www.pengutronix.de/ | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
