Hello Leigh, On Tue, Jul 31, 2018 at 02:21:04PM +0100, Leigh Brown wrote: > Have I missed any steps? Any help would be greatly appreciated. Looks good. Which revision are you on (i.e. git rev-parse @ in your barebox copy)? What is currently running on the device? Do you get an U when applying this patch?: diff --git a/arch/arm/boards/globalscale-mirabox/lowlevel.c b/arch/arm/boards/globalscale-mirabox/lowlevel.c index 69786c88fb22..6abf96592496 100644 --- a/arch/arm/boards/globalscale-mirabox/lowlevel.c +++ b/arch/arm/boards/globalscale-mirabox/lowlevel.c @@ -31,5 +31,6 @@ ENTRY_FUNCTION(start_globalscale_mirabox, r0, r1, r2) fdt = __dtb_armada_370_mirabox_bb_start + get_runtime_offset(); + writel(0x55, 0xd0012000); armada_370_xp_barebox_entry(fdt); } I just tried 7ba0f2d29959256025ece9ae961a6c3421445a7f on my ReadyNAS 104 which has an armada370, too. I hangs when using second-stage booting from the Vendor U-Boot after: barebox 2018.07.0-00139-g7ba0f2d29959-dirty #50 Mon Aug 6 20:27:11 CEST 2018 Board: Marvell Armada 370/XP SoC: Marvell 6710 rev 1 mdio_bus: miibus0: probed eth1: got preset MAC address: 28:c6:8e:36:df:57 When enabling DEBUG_INITCALLS I got a prompt, hmm. Didn't debug that further. Best regards Uwe -- Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | http://www.pengutronix.de/ | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
