Thanks for the info. i got that already. Some configs that should be
enabled are not to be found in my barebox yet.
I will work on it and if I am not successful maybe I will return with
a question.
Best regards,
Mihaita
On Fri, Jul 20, 2018 at 11:57 AM Oleksij Rempel <linux@xxxxxxxxxxxxxxxx> wrote:
>
> Am 20.07.2018 um 11:32 schrieb Mihaita Ivascu:
> > Hi,
> >
> > I have both Android Fastboot support and Fastboot sparse image
> > support enabled in barebox config(is by default) but I see not device
> > node created when connecting USB device nor do I see any fastboot
> > commands in barebox shell.
> > My question is: how do I use fastboot? What is the complete
> > configuration needed to enable fastboot in barebox?
>
> Googling "barebox fastboot"
> First result which i get is this page:
> https://www.barebox.org/doc/latest/user/usb.html#android-fastboot-support
>
> > Best regards,
> > Mihaita Ivascu
> >
> >
> > On Fri, Jul 20, 2018 at 11:11 AM Uwe Kleine-König
> > <u.kleine-koenig@xxxxxxxxxxxxxx> wrote:
> >>
> >> On Wed, Jul 18, 2018 at 09:39:23AM +0200, Mihaita Ivascu wrote:
> >>> Hello,
> >>>
> >>> I would like to flash a barebox image on NAND for a Phytec imx6ul
> >>> evk board using MFGTools.
> >>> I have added support for UTP protocol in kernel image so commands
> >>> could be "pushed" using MFGtools app from Windows.
> >>> But obviously I cannot push barebox_update command to Linux.
> >>> So I think I have two options:
> >>>
> >>> 1) porting barebox_update command to Linux which I do not find it so
> >>> easy. I am already working on it
> >>> 2) adding UTP support in barebox so I could just load the barebox
> >>> image in RAM using MFGtools, there a utp device node would be created
> >>> and then I could push barebox specific commands directly from
> >>> MFGtools.
> >>> I have added UTP support in linux USB gadget code but I see
> >>> barebox USB gadget code is quite different and not all functionality
> >>> are in place so I also struggle a bit of porint gUTP patches from
> >>> Linux to barebox.
> >>> Does anybody have any experience with this topic or coud advise
> >>> me on how to procee?
> >>
> >> Why are you sticked to MFGTools? barebox can do fastboot which should
> >> work from Windows just fine.
> >>
> >> Best regards
> >> Uwe
> >>
> >> --
> >> Pengutronix e.K. | Uwe Kleine-König |
> >> Industrial Linux Solutions | http://www.pengutronix.de/ |
> >
> > _______________________________________________
> > barebox mailing list
> > barebox@xxxxxxxxxxxxxxxxxxx
> > http://lists.infradead.org/mailman/listinfo/barebox
> >
>
>
> --
> Regards,
> Oleksij
>
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
