On Thu, Apr 26, 2018 at 04:02:48PM +0300, Nikita Yushchenko wrote: > Timeout of 1ms is too low for case when device operates in Full Speed > mode. This causes most incoming frames to be lost. > > Since timeout is only used to get out of polling loop in case of no > response from hardware, increasing it should be safe for all platforms. > > Signed-off-by: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx> > Tested-By: Andrew Lunn <andrew@xxxxxxx> > --- Applied, thanks. The patch is whitespace damaged, I fixed this up manually this time. Sascha > drivers/net/usb/usbnet.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c > index 33d900b70..60e67ff1a 100644 > --- a/drivers/net/usb/usbnet.c > +++ b/drivers/net/usb/usbnet.c > @@ -125,7 +125,7 @@ static int usbnet_recv(struct eth_device *edev) > len = dev->rx_urb_size; > - ret = usb_bulk_msg(dev->udev, dev->in, rx_buf, len, &alen, 1); > + ret = usb_bulk_msg(dev->udev, dev->in, rx_buf, len, &alen, 100); > if (ret) > return ret; > -- 2.11.0 > > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
