Re: [PATCH v2 3/3] ARM: i.MX6: add Technexion Pico Hobbit support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 06, 2017 at 01:03:48PM +0200, Michael Grzeschik wrote:
> On Tue, Jun 06, 2017 at 08:18:40AM +0200, Sascha Hauer wrote:
> > On Fri, Jun 02, 2017 at 03:18:08PM +0200, Michael Grzeschik wrote:
> > > This adds support support for the i.MX6UL Technexion Pico Hobbit.
> > > The board comes with different amounts of RAM. We create one image
> > > for the 256MB and one for the 512MB variant.
> > > 
> > > Signed-off-by: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
> > > ---
> > > v1 -> v2: - removed already prepared clock setup
> > > 
> > > +
> > > +&usdhc1 {
> > > +	#address-cells = <1>;
> > > +	#size-cells = <1>;
> > > +
> > > +	partition@0 {
> > > +		label = "barebox";
> > > +		reg = <0x0 0xc0000>;
> > > +	};
> > > +
> > > +	environment_usdhc1: partition@c0000 {
> > > +		label = "barebox-environment";
> > > +		reg = <0xc0000 0x40000>;
> > > +	};
> > > +};
> > > +
> > > +&fec2 {
> > > +	/*
> > > +	  There are two possible ways to start the phy. Let the hardware
> > > +	  reset it properly or reset it a second time in software.
> > > +	  Unfortunetly the phy needs some microseconds after reset to
> > > +	  settle down. As there is no property like
> > > +	  phy-post-reset-delay, we better leave the reset to the
> > > +	  hardware.
> > > +	*/
> > > +	/delete-property/ phy-reset-gpios;
> > > +	/delete-property/ phy-reset-duration;
> > 
> > Recent Kernels support phy-reset-post-delay. Can we just add support for
> > it in barebox aswell?
> 
> Could we for now stick with this? When I write the phy-reset-post-delay
> patches I will then adopt this node in the regarding series. This gives
> me some time, as I can not test the post-delay patch in the next two
> weeks.

Ok, I reworded the comment to:

	/*
	 * There are two possible ways to start the phy. Let the hardware
	 * reset it properly or reset it a second time in software.
	 * Unfortunetly the phy needs some microseconds after reset to
	 * settle down.
	 * FIXME: Port support for the "phy-reset-post-delay" property to
	 *        barebox.
	 */

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux