Hi Sascha,
Am 17.05.2017 um 08:35 schrieb Sascha Hauer:
On Fri, May 12, 2017 at 01:07:19PM +0200, Daniel Schultz wrote:
The Beaglebone environment should be set from outside with an application
specific environment.
Signed-off-by: Daniel Schultz <d.schultz@xxxxxxxxx>
---
arch/arm/boards/beaglebone/Makefile | 1 -
arch/arm/boards/beaglebone/board.c | 2 --
arch/arm/boards/beaglebone/defaultenv-beaglebone/boot/sd | 6 ------
.../arm/boards/beaglebone/defaultenv-beaglebone/init/usb-limit-1300 | 5 -----
4 files changed, 14 deletions(-)
delete mode 100644 arch/arm/boards/beaglebone/defaultenv-beaglebone/boot/sd
delete mode 100644 arch/arm/boards/beaglebone/defaultenv-beaglebone/init/usb-limit-1300
--- a/arch/arm/boards/beaglebone/defaultenv-beaglebone/init/usb-limit-1300
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-echo -n "changing USB current limit to 1300 mA... "
-i2c_write -b 0 -a 0x24 -r 0x01 0x3e
-echo "done"
We need this on the beagleboard. We can't just delete it without doing
this somewhere else.
Also I still do not understand the reasoning behind this change. Where
is "outside", to which application should the environment be specific
to?
Please revoke this patch. Sorry.
Sascha
--
Mit freundlichen Grüßen,
With best regards,
Daniel Schultz
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
