Am Dienstag, den 09.05.2017, 17:08 +0200 schrieb Stefan Riedmüller: > Hi guys, > > after applying the latest master patches barebox does not boot anymore on my PHYTEC-phyCORE-i.MX6UL. It doesn't show any output. I was able to identify the commit which seems to be responsible for this behavior. > > It's 2c506afbadcd546dcc54a0e8599e454fd4aecfdc (ARM: i.MX50: Add support for i.MX50 based Amazon Kindle e-book readers). > > It is possible to make the board boot again by disabling System Type --> CONFIG_MACH_KINDLE_MX50 (i.MX50 based Amazon Kindle 4 and 5) in the menuconfig. This deactivates ARCH_IMX50. I also tested it on the PHYTEC-phyCORE-i.MX6-Quad board and the Fresscale SabreSD board with i.MX6 Quad and found the same behavior. I could not find an explanation yet for this so I hope you can help me. The kindle initcalls are missing the compatibility checks, so they will be executed on every machine on a multi-image build, which is wrong. Regards, Lucas _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
