master breaks phytec-phycore-imx6ul

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi guys,

after applying the latest master patches barebox does not boot anymore on my PHYTEC-phyCORE-i.MX6UL. It doesn't show any output. I was able to identify the commit which seems to be responsible for this behavior.

It's 2c506afbadcd546dcc54a0e8599e454fd4aecfdc (ARM: i.MX50: Add support for i.MX50 based Amazon Kindle e-book readers).

It is possible to make the board boot again by disabling System Type --> CONFIG_MACH_KINDLE_MX50 (i.MX50 based Amazon Kindle 4 and 5) in the menuconfig. This deactivates ARCH_IMX50. I also tested it on the PHYTEC-phyCORE-i.MX6-Quad board and the Fresscale SabreSD board with i.MX6 Quad and found the same behavior. I could not find an explanation yet for this so I hope you can help me.

Mit freundlichen Grüßen,
Best regards,

Stefan Riedmüller


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox




[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux