On Tue, Apr 18, 2017 at 11:15:58AM +0200, Michael Grzeschik wrote: > This adds a driver for the SDHCI controller found on Marvell Dove SoCs. > Despite a missing pinctrl driver, corresponding MPP config has to be > set on a per board basis. > > This driver was succesfully tested with Solidrun Dove Cubox. > > Signed-off-by: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx> > Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> > Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> > > --- > RFC -> v1: - acknowledging the dma_int status bit to resume xfer > - added dma_sync_single_for_device where we handover data > - rate limited the multiwrite size with an max_req_size > and increased the timeout according to the data being > handled > > v1 -> v2: - added myself to authors > - added ACK from Sebastian > --- > arch/arm/configs/mvebu_defconfig | 1 + > drivers/mci/Kconfig | 7 + > drivers/mci/Makefile | 1 + > drivers/mci/dove-sdhci.c | 392 +++++++++++++++++++++++++++++++++++++++ > drivers/mci/sdhci.h | 59 ++++++ > 5 files changed, 460 insertions(+) > create mode 100644 drivers/mci/dove-sdhci.c Applied, thanks Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox