On Fri, Mar 31, 2017 at 02:41:19PM +0300, Çağlar Kilimci wrote: > Hey, > > >> > Ok, here's your problem. I assume you edited > >> > arch/arm/dts/am335x-phytec-phycore-som.dts, right? Could you send the > >> > diff to that file (or to the one you edited)? There must be something > >> > wrong here. > >> > >> Actually, I was using arch/arm/boot/dts/am335x-phycore-som.dtsi in the > >> linux-ti kernel and the diff is: > > > > Ok, when you're changing the Linux dts then barebox of course doesn't > > know about this. > > > >> > >> Let me edit "arch/arm/dts/am335x-phytec-phycore-som.dts" and try it. > > > > Yes, please. That sounds better. > > I tried but got the same result and then I would like to apply your > serious patch series of the state framework but release that our > working branch is 2016.07 so could not apply patches. Let me update > barebox and apply those patches. Are those based on master branch > right? Or, which branch do you recommend to work on? The patches are based on master, yes. Anyway, you seem to have a problem in getting your changes in the dts file to the running barebox. Please try to add some nodes/properties to your dts file and verify that a of_dump shows these nodes. Before that is the case it's not worth to look any further. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
