The phyCORE-RK3288 aka PCM-059 is a SoM (System on Module) containing a RK3288 SoC. The module can be connected to different carrier boards. Signed-off-by: Wadim Egorov <w.egorov@xxxxxxxxx> --- arch/arm/boards/Makefile | 1 + arch/arm/boards/phytec-som-rk3288/Makefile | 3 + arch/arm/boards/phytec-som-rk3288/board.c | 31 +++++ .../defaultenv-physom-rk3288/boot/emmc | 6 + .../defaultenv-physom-rk3288/boot/mmc | 6 + .../defaultenv-physom-rk3288/init/automount | 12 ++ .../defaultenv-physom-rk3288/init/bootsource | 3 + arch/arm/boards/phytec-som-rk3288/lowlevel.c | 44 ++++++ arch/arm/dts/Makefile | 1 + arch/arm/dts/rk3288-phycore-som.dts | 148 +++++++++++++++++++++ arch/arm/mach-rockchip/Kconfig | 7 + images/Makefile.rockchip | 4 + 12 files changed, 266 insertions(+) create mode 100644 arch/arm/boards/phytec-som-rk3288/Makefile create mode 100644 arch/arm/boards/phytec-som-rk3288/board.c create mode 100644 arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/boot/emmc create mode 100644 arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/boot/mmc create mode 100644 arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/init/automount create mode 100644 arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/init/bootsource create mode 100644 arch/arm/boards/phytec-som-rk3288/lowlevel.c create mode 100644 arch/arm/dts/rk3288-phycore-som.dts diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile index 9241b66..24ce130 100644 --- a/arch/arm/boards/Makefile +++ b/arch/arm/boards/Makefile @@ -95,6 +95,7 @@ obj-$(CONFIG_MACH_PM9G45) += pm9g45/ obj-$(CONFIG_MACH_QIL_A9260) += qil-a926x/ obj-$(CONFIG_MACH_QIL_A9G20) += qil-a926x/ obj-$(CONFIG_MACH_RADXA_ROCK) += radxa-rock/ +obj-$(CONFIG_MACH_PHYTEC_SOM_RK3288) += phytec-som-rk3288/ obj-$(CONFIG_MACH_REALQ7) += datamodul-edm-qmx6/ obj-$(CONFIG_MACH_RPI_COMMON) += raspberry-pi/ obj-$(CONFIG_MACH_SABRELITE) += freescale-mx6-sabrelite/ diff --git a/arch/arm/boards/phytec-som-rk3288/Makefile b/arch/arm/boards/phytec-som-rk3288/Makefile new file mode 100644 index 0000000..6f34c9a --- /dev/null +++ b/arch/arm/boards/phytec-som-rk3288/Makefile @@ -0,0 +1,3 @@ +obj-y += board.o +lwl-y += lowlevel.o +bbenv-y += defaultenv-physom-rk3288 diff --git a/arch/arm/boards/phytec-som-rk3288/board.c b/arch/arm/boards/phytec-som-rk3288/board.c new file mode 100644 index 0000000..8ea6c6c --- /dev/null +++ b/arch/arm/boards/phytec-som-rk3288/board.c @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2016 PHYTEC Messtechnik GmbH, + * Author: Wadim Egorov <w.egorov@xxxxxxxxx> + * + * Device initialization for the phyCORE-RK3288 SoM + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <init.h> +#include <envfs.h> + +static int physom_devices_init(void) +{ + if (!of_machine_is_compatible("phytec,rk3288-phycore-som")) + return 0; + + barebox_set_hostname("pcm059"); + defaultenv_append_directory(defaultenv_physom_rk3288); + + return 0; +} +device_initcall(physom_devices_init); diff --git a/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/boot/emmc b/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/boot/emmc new file mode 100644 index 0000000..731b07f --- /dev/null +++ b/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/boot/emmc @@ -0,0 +1,6 @@ +#!/bin/sh + +global.bootm.image=/mnt/emmc/linuximage +global.bootm.oftree=/mnt/emmc/oftree + +global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2 rw rootwait" diff --git a/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/boot/mmc b/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/boot/mmc new file mode 100644 index 0000000..1b743c5 --- /dev/null +++ b/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/boot/mmc @@ -0,0 +1,6 @@ +#!/bin/sh + +global.bootm.image=/mnt/sdmmc/linuximage +global.bootm.oftree=/mnt/sdmmc/oftree + +global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2 rw rootwait" diff --git a/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/init/automount b/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/init/automount new file mode 100644 index 0000000..2f9d78a --- /dev/null +++ b/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/init/automount @@ -0,0 +1,12 @@ +#!/bin/sh + +if [ "$1" = menu ]; then + init-menu-add-entry "$0" "Automountpoints" + exit +fi + +mkdir -p /mnt/emmc +automount -d /mnt/emmc 'mshc0.probe=1 && [ -e /dev/mshc0.0 ] && mount /dev/mshc0.0 /mnt/emmc' + +mkdir -p /mnt/sdmmc +automount -d /mnt/sdmmc 'mshc1.probe=1 && [ -e /dev/mshc1.0 ] && mount /dev/mshc1.0 /mnt/sdmmc' diff --git a/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/init/bootsource b/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/init/bootsource new file mode 100644 index 0000000..36d34e3 --- /dev/null +++ b/arch/arm/boards/phytec-som-rk3288/defaultenv-physom-rk3288/init/bootsource @@ -0,0 +1,3 @@ +#!/bin/sh + +global.boot.default="emmc mmc" diff --git a/arch/arm/boards/phytec-som-rk3288/lowlevel.c b/arch/arm/boards/phytec-som-rk3288/lowlevel.c new file mode 100644 index 0000000..7804a55 --- /dev/null +++ b/arch/arm/boards/phytec-som-rk3288/lowlevel.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2016 PHYTEC Messtechnik GmbH, + * Author: Wadim Egorov <w.egorov@xxxxxxxxx> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <linux/sizes.h> +#include <asm/barebox-arm-head.h> +#include <asm/barebox-arm.h> +#include <mach/rk3288-regs.h> +#include <mach/grf_rk3288.h> +#include <mach/hardware.h> +#include <debug_ll.h> + +extern char __dtb_rk3288_phycore_som_start[]; + +ENTRY_FUNCTION(start_rk3288_phycore_som, r0, r1, r2) +{ + void *fdt; + arm_cpu_lowlevel_init(); + + if (IS_ENABLED(CONFIG_DEBUG_LL)) { + struct rk3288_grf * const grf = (void *)RK3288_GRF_BASE; + rk_clrsetreg(&grf->gpio4c_iomux, + GPIO4C1_MASK << GPIO4C1_SHIFT | + GPIO4C0_MASK << GPIO4C0_SHIFT, + GPIO4C1_UART0BT_SOUT << GPIO4C1_SHIFT | + GPIO4C0_UART0BT_SIN << GPIO4C0_SHIFT); + INIT_LL(); + } + + fdt = __dtb_rk3288_phycore_som_start - get_runtime_offset(); + + barebox_arm_entry(0x0, SZ_1G, fdt); +} diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 813e098..77c9ff3 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -54,6 +54,7 @@ pbl-dtb-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += imx6q-phytec-pbaa03.dtb.o \ pbl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += armada-xp-openblocks-ax3-4-bb.dtb.o pbl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += kirkwood-openblocks_a6-bb.dtb.o pbl-dtb-$(CONFIG_MACH_RADXA_ROCK) += rk3188-radxarock.dtb.o +pbl-dtb-$(CONFIG_MACH_PHYTEC_SOM_RK3288) += rk3288-phycore-som.dtb.o pbl-dtb-$(CONFIG_MACH_REALQ7) += imx6q-dmo-edmqmx6.dtb.o pbl-dtb-$(CONFIG_MACH_SABRELITE) += imx6q-sabrelite.dtb.o imx6dl-sabrelite.dtb.o pbl-dtb-$(CONFIG_MACH_SABRESD) += imx6q-sabresd.dtb.o diff --git a/arch/arm/dts/rk3288-phycore-som.dts b/arch/arm/dts/rk3288-phycore-som.dts new file mode 100644 index 0000000..05ddd9c --- /dev/null +++ b/arch/arm/dts/rk3288-phycore-som.dts @@ -0,0 +1,148 @@ +/* + * Copyright (C) 2016 PHYTEC Messtechnik GmbH, + * Author: Wadim Egorov <w.egorov@xxxxxxxxx> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include <arm/rk3288.dtsi> + +/ { + model = "phycore-rk3288"; + compatible = "phytec,rk3288-phycore-som", "rockchip,rk3288"; + + memory { + reg = <0 0x40000000>; + }; + + vcc33: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vcc33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc18: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vcc18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + chosen { + stdout-path = &uart0; + + environment-emmc { + compatible = "barebox,environment"; + device-path = &emmc, "partname:barebox-environment"; + status = "disabled"; + }; + + environment-sdmmc { + compatible = "barebox,environment"; + device-path = &sdmmc, "partname:barebox-environment"; + status = "disabled"; + }; + }; +}; + +&pinctrl { + sdmmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; +}; + +&emmc { + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>; + vmmc-supply = <&vcc33>; + vqmmc-supply = <&vcc18>; + status = "okay"; + + #size-cells = <1>; + #address-cells = <1>; + + partition@8000 { + label = "spl"; + reg = <0x8000 0x8000>; + }; + + partition@20000 { + label = "barebox"; + reg = <0x20000 0xe0000>; + }; + + partition@e0000 { + label = "barebox-environment"; + reg = <0xe0000 0x20000>; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; + vmmc-supply = <&vcc33>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <1>; + + partition@8000 { + label = "spl"; + reg = <0x8000 0x8000>; + }; + + partition@20000 { + label = "barebox"; + reg = <0x20000 0xe0000>; + }; + + partition@e0000 { + label = "barebox-environment"; + reg = <0xe0000 0x20000>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>; + reg-shift = <2>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index fa0e8fc..6f02643 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -30,4 +30,11 @@ config MACH_RADXA_ROCK select MFD_ACT8846 bool "Radxa rock board" +config MACH_PHYTEC_SOM_RK3288 + depends on ARCH_RK3288 + select I2C + bool "RK3288 phyCORE SOM" + help + Say Y here if you are using a RK3288 based Phytecs SOM + endmenu diff --git a/images/Makefile.rockchip b/images/Makefile.rockchip index 9715b92..3f1ee57 100644 --- a/images/Makefile.rockchip +++ b/images/Makefile.rockchip @@ -5,3 +5,7 @@ pblx-$(CONFIG_MACH_RADXA_ROCK) += start_radxa_rock FILE_barebox-radxa-rock.img = start_radxa_rock.pblx image-$(CONFIG_MACH_RADXA_ROCK) += barebox-radxa-rock.img + +pblx-$(CONFIG_MACH_PHYTEC_SOM_RK3288) += start_rk3288_phycore_som +FILE_barebox-rk3288-phycore-som.img = start_rk3288_phycore_som.pblx +image-$(CONFIG_MACH_PHYTEC_SOM_RK3288) += barebox-rk3288-phycore-som.img -- 1.9.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox