On Fri, Jul 08, 2016 at 09:25:43AM +0200, Uwe Kleine-König wrote: > This is necessary to prevent the imx_nand_bbm command to bail out > on ECC errors which leaves the device without BBT. > > Also simplify buffer management: Use on-stack buffer instead of malloc. > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> > --- > Changes since (implicit) v1 sent with Message-Id: 1467884923-24060-1-git-send-email-u.kleine-koenig@xxxxxxxxxxxxxx: > > - drop two now unused variables fixing two compiler warnings > > drivers/mtd/nand/nand_imx_bbm.c | 33 ++++++++++++++++----------------- > 1 file changed, 16 insertions(+), 17 deletions(-) Applied, thanks Sascha > > diff --git a/drivers/mtd/nand/nand_imx_bbm.c b/drivers/mtd/nand/nand_imx_bbm.c > index 251dfe5d3f12..23722a906473 100644 > --- a/drivers/mtd/nand/nand_imx_bbm.c > +++ b/drivers/mtd/nand/nand_imx_bbm.c > @@ -52,12 +52,20 @@ > * on the flash BBT. > * > */ > -static int checkbad(struct mtd_info *mtd, loff_t ofs, void *__buf) > +static int checkbad(struct mtd_info *mtd, loff_t ofs) > { > - int ret, retlen; > - uint8_t *buf = __buf; > - > - ret = mtd->read(mtd, ofs, mtd->writesize, &retlen, buf); > + int ret; > + uint8_t buf[mtd->writesize + mtd->oobsize]; > + struct mtd_oob_ops ops; > + > + ops.mode = MTD_OPS_RAW; > + ops.ooboffs = 0; > + ops.datbuf = buf; > + ops.len = mtd->writesize; > + ops.oobbuf = buf + mtd->writesize; > + ops.ooblen = mtd->oobsize; > + > + ret = mtd_read_oob(mtd, ofs, &ops); > if (ret < 0) > return ret; > > @@ -72,7 +80,6 @@ static void *create_bbt(struct mtd_info *mtd) > struct nand_chip *chip = mtd->priv; > int len, i, numblocks, ret; > loff_t from = 0; > - void *buf; > uint8_t *bbt; > > if ((chip->bbt_td && chip->bbt_td->pages[0] != -1) || > @@ -88,18 +95,12 @@ static void *create_bbt(struct mtd_info *mtd) > if (!bbt) > return ERR_PTR(-ENOMEM); > > - buf = malloc(mtd->writesize); > - if (!buf) { > - ret = -ENOMEM; > - goto out2; > - } > - > numblocks = mtd->size >> (chip->bbt_erase_shift - 1); > > for (i = 0; i < numblocks;) { > - ret = checkbad(mtd, from, buf); > + ret = checkbad(mtd, from); > if (ret < 0) > - goto out1; > + goto out; > > if (ret) { > bbt[i >> 3] |= 0x03 << (i & 0x6); > @@ -113,9 +114,7 @@ static void *create_bbt(struct mtd_info *mtd) > > return bbt; > > -out1: > - free(buf); > -out2: > +out: > free(bbt); > > return ERR_PTR(ret); > -- > 2.8.1 > > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox