On Thu, 7 Jul 2016, Sascha Hauer wrote: > > + > > +echo -n "Hit any key to stop autoboot: " > > +timeout -a $global.autoboot_timeout > > +if [ $? != 0 ]; then > > + echo > > + echo > > + exit > > +fi > > + > > +boot > > diff --git a/arch/arm/boards/kindle3/env/bin/set_serials b/arch/arm/boards/kindle3/env/bin/set_serials > > Move this to /env/init/set_serials to let it automatically execute. > > > new file mode 100644 > > index 0000000..e7e0881 > > --- /dev/null > > +++ b/arch/arm/boards/kindle3/env/bin/set_serials > > @@ -0,0 +1,18 @@ > > +#!/bin/sh > > + > > +# 16-byte alphanumeric containing the serial number > > +# SN is the first 16 bytes before the bootloader > > +if test -b /dev/disk0.serial; then > > + if memcpy -s /dev/disk0.serial -d tmp_serial16 -b 0 0 16; then > > + readf tmp_serial16 global.board.serial16 > > + fi > > +fi > > +[ -f tmp_serial16 ] && rm tmp_serial16 > > + > > +# 16-byte alphanumeric containing the board revision > > +if test -b /dev/disk0.imx_header; then > > + if memcpy -s /dev/disk0.imx_header -d tmp_revision16 -b 2032 0 16; then > > + readf tmp_revision16 global.board.revision16 > > + fi > > +fi > > +[ -f tmp_revision16 ] && rm tmp_revision16 > > diff --git a/arch/arm/boards/kindle3/env/boot/mmc_kernel b/arch/arm/boards/kindle3/env/boot/mmc_kernel > > new file mode 100644 > > index 0000000..c6145b8 > > --- /dev/null > > +++ b/arch/arm/boards/kindle3/env/boot/mmc_kernel > > @@ -0,0 +1,7 @@ > > +#!/bin/sh > > +# Boot the Amazon factory-shipped kernel uimage stored on > > +# the eMMC at MOVINAND_OFFSET_KERNEL=266240. > > + > > +global linux.bootargs.dyn.root="root=/dev/mmcblk0p1 ro" > > + > > +bootm -c -a 0x80008000 /dev/disk0.kernel > > diff --git a/arch/arm/boards/kindle3/env/config b/arch/arm/boards/kindle3/env/config > > new file mode 100644 > > index 0000000..9b95330 > > --- /dev/null > > +++ b/arch/arm/boards/kindle3/env/config > > @@ -0,0 +1,15 @@ > > +#!/bin/sh > > + > > +# timeout in seconds before the default boot entry is started > > +global.autoboot_timeout=3 > > + > > +# list of boot entries. These are executed in order until one > > +# succeeds. An entry can be: > > +# - a filename in /env/boot/ > > +# - a full path to a directory. All files in this directory are > > +# treated as boot files and executed in alphabetical order > > +global.boot.default=mmc_kernel > > + > > +global.linux.bootargs.base="mem=256M ip=none lpj=2555904" > > +global.linux.bootargs.console="console=ttymxc0,115200" > > Create files under /env/nv named after the variables with the content of > the variables: > > /env/nv/boot.default should contain "mmc_kernel" > /env/nv/linux.bootargs.base should contain "mem=256M ip=none lpj=2555904" > > and so on. Thanks for your hints how to use defaultenv-2, this was an easy way how to eleminate the redundant passages in my previous env/bin/ subdir. Cheers, Alexander _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
